Wheel backspacing - try not to flame here.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 3, 2002
Threads
197
Messages
4,388
Location
Higganum.
Searched and searched. What I need to know is the actual backspacing of an original drum brake wheel. This is the flipside of the standard backspacing question. I don't care what will fit on a FJxx, just need to know the backspacing of the original drum brake 40 wheel. :)
 
Thanks, found that stuff. Just want to verify that 3 1/2" is the actual backspacing of the stock wheel?

Trying to find an alternative to the 25 wheel which is 16" and has 2-3/4" backspacing looks like I can run a 15" wheel but 3" + backspacing would be in my tie rod ends (the 25 is different than the 40). :mad:
 
Somewhere I saw a picture someone posted of the 3.5 inch backspacing on the stock wheel. They had used a tape measure, so I have to believe it.

I would think you could use a spacer to accomodate some of that difference, although 3/4 inch seems like a bit too much. But maybe you could take up some. Maybe slightly longer studs would help?
 
Thanks IDave, now I don't have to track one down to try it. Been the route with long 1/2" studs and spacers. Made for shady handling.

If I have to get a set made, may as well go 16". :D
 
Back
Top Bottom