what width rim?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 30, 2008
Threads
24
Messages
106
Location
Battle Ground WA
I am getting a set of 315/75x16 goodyear mtr's and am wondering if i should get an 8in wide wheel or 10in. I will be going with the street locks the simulated beadlock black steel wheels. also what kind of backspacing would be best.
 
Street locks are gay :)
I'd go with the 8" wheel....less chance of loosing a bead when you air down.
Seriously...did I mention sim-u-locks are gay :D

x2

just get straight up black steelies.
 
I think the sim-locks are gay too! But that massive outer lip does have a strength advantage. But mud does pile up behind it.
x2 on the 8" for heavy wheeling. 10" for mainly street use with more even tread wear.
 
Street locks are gay :)
I'd go with the 8" wheel....less chance of loosing a bead when you air down.
Seriously...did I mention sim-u-locks are gay :D

X4 on the street-locks or so they call them. I parked next to a heep owner that had some pretty real-looking simulocks and I asked him if they were real bead locks. He got a sheepishly embarrassed look on his face and admitted they were fake. You don't want to be "that guy."


One other note on the 10" wheel. It may cause extra binding/rubbing on full flex depending on your setup. They also cause added stress to steering components and bearings etc. My IFS chebby used to blow through ball joints and TRE's like crazy with 35's and 10" wheels. Obviously the 80 is in a totally different league, but the same principles should cross over to some extent.
 
OTOH, all those DOT approved Street locks that all the oil boys are running on their huge domestic trucks are making the cops numb to the authentic, non DOT approved beadlocks. A few years ago they were a real heat score. These days the cops don't bat an eye.
 
Back
Top Bottom