what to buy?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 7, 2005
Threads
2
Messages
5
hi all! if a guy needed to rebuild his front and rear axles and convert to rear disks on a 76 fj40 would it be smart to just buy 79-85 toyota 4-runner salvaged so you could change over axles adapt brake lines plus you could use the power stearing box and other misc. parts like master cylinder. Just A thought I'm A noob so I ask the experts, looked under tech links on axle swaps, no info will something like this work, would they fit, would they be as strong thanks shawn
 
firts off, have you priced a 79-85 4runner? Those things are expensive!

Rebuilding the front end and adding disk brakes to the rear should run you way under the $500 range...... Depending on how you do it, it can be more or less.

You allready have power brakes, not sure why you would want to swap master cylinders.....

The 4runner/mini truck axles have small tubes and small differentials. I think swapping these in would be a mistake on most FJ40's.

The power steering on the 4runner/mini is "push/pull". it works well with smaller tires (I have it on my 40), but there are better options available.
PMK

Big Bane said:
hi all! if a guy needed to rebuild his front and rear axles and convert to rear disks on a 76 fj40 would it be smart to just buy 79-85 toyota 4-runner salvaged so you could change over axles adapt brake lines plus you could use the power stearing box and other misc. parts like master cylinder. Just A thought I'm A noob so I ask the experts, looked under tech links on axle swaps, no info will something like this work, would they fit, would they be as strong thanks shawn
 
I think the Master Cylinder swap would be so you don't need a proportioning valve (since the 4-runner mc would be set up for rear disks), I think. Don't know if it is a direct swap. Someone said the Supra mc is a direct swap (the non-ABS model).
 
94 Tacoma V6 Master (Non ABS model) master cyl...bolt on application....pre-proportioned. And for he who is the ney-sayer about minitruck front...i have seen it done and a lot of guys say the little extra work to use minitruck is way better...besides...he can get some longfields once he has the $$$(if he doesn't already) Search button and the FAQ in this section would be a lot of help to you.
 
That is why I said "most" ;)
I hear a lot on the mini-truck boards about bent housings, and that is under a 2500-3000Lb rig. If you are going to swap in mini-axles, you should seriously think about weight reduction. They're not going to survive extreem use very well under a 4500-5000 pound rig.
But that's just my opinion....
PMK

projektdotnet said:
94 Tacoma V6 Master (Non ABS model) master cyl...bolt on application....pre-proportioned. And for he who is the ney-sayer about minitruck front...i have seen it done and a lot of guys say the little extra work to use minitruck is way better...besides...he can get some longfields once he has the $$$(if he doesn't already) Search button and the FAQ in this section would be a lot of help to you.
 
projektdotnet said:
And for he who is the ney-sayer about minitruck front...i have seen it done and a lot of guys say the little extra work to use minitruck is way better...besides...he can get some longfields once he has the $$$(if he doesn't already) Search button and the FAQ in this section would be a lot of help to you.


now come awn, you know the mini truck everyone does is just the knuckles out, only the ill informed would swap the whole axle under. they do bend, even under a 4 banger mini.
 
RHINO said:
now come awn, you know the mini truck everyone does is just the knuckles out, only the ill informed would swap the whole axle under. they do bend, even under a 4 banger mini.
thats what i meant...maybe i misunderstood something...he is talking about a full axle swap then? The axles that are already in there are fine for me...not for all.
 
so basicly the 4-runner idea is not a good idea, I thought A newer 4-runner would have all disks just A guess. so if this will weaken my rig then I wont do it, on my 76 I do not have power ass. brakes thou if the 76 cruiser is supposed to have them the the po must have changed it out, because there is no booster. My friend has auto dismantling yard so I'm looking for swaps. I'd like ps,pb, and disk all around, I know most rear disk conversions run about 500$ so I was looking for swaps as I can get a salvaged rig for this price. Any other options I can do? also how much would it cost for f/r total axle rebuild? I live in Fresno ca.
 
Big Bane said:
thanks projektdotnet! will taco m/c bolt straight in?
dont remember where the article is but it SHOULD be a bolt on application...it's not exactly cheap by my standards but nothing on this cruiser has been. I belive its a 94 Tavo V6 Non-ABS...i will see if i can find the article but i am awfully sure thats what it is.
 
Back
Top Bottom