What should I do, Engine Swap.

What should i do with my engine

  • Get the 95 with 88k and swap

    Votes: 10 66.7%
  • Rebuild the 94

    Votes: 5 33.3%

  • Total voters
    15

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 22, 2007
Threads
51
Messages
247
Location
San Ramon, CA
Website
www.nullterminal.org
Hey guys,

I've finally got the engine i need within grasps and my dad wants to know what i really want to do, so i figured I should ask all you in a poll.

I've found a '95 engine with 88k on it for 700 if i trade my old engine with it (i have a '94 with 225k on it and rod knocking)

But the question my dad wants me to ask myself is should i Swap the two engines, or just rebuild the '94 because i've heard the '94 was one of the best years.

Soooo heres a poll for you guys.
 
ASSUMING this 95 engine ran perfectly when removed and has been handled and stored properly since then I think it is a no brainer to go for the 95 engine, but that is a big assumption on my part.

to properly fully rebuild the 94 is going to be much more expensive.

There is no advantage of the 94 engine over the 95, AFAIK , they are identical internally with the possible exception of the 95 having an improved timing chain slipper (was that in 93/94 split or 94/95? I can't remember)

externally the 95 is an almost OBDII motor, having a MAF meter and a better ECU, No Pair valve, not sure how much of it you are going to swap over though, if you are going to reuse the harness ECU and air flow meter from the 94 it does not matter, if you wanted to use the 95 OBDII setup you would need the exhaust and o2 sensors air intake box and a few other things from the 95
 
Without some sort of warrenty on the 95 engine you are rolling the dice IMHO. Do you have a previous history for the 95? How long has it been out of the truck and how was it stored? Do you trust the seller?

The biggest question is the one your dad has already asked, What do you really want to do? What does your gut tell you?
 
Without some sort of warrenty on the 95 engine you are rolling the dice IMHO. Do you have a previous history for the 95? How long has it been out of the truck and how was it stored? Do you trust the seller?

The biggest question is the one your dad has already asked, What do you really want to do? What does your gut tell you?

$700 vs $4000. It's worth taking a chance! Swap the 95 long block in. You're probably good for another 100k at least.
 
if you do the 95 engine don't let go of you old engien until you have driven with the new one,

hpw much more to just keep your old engine instead of the trade?
 
if you do the 95 engine don't let go of you old engien until you have driven with the new one,

hpw much more to just keep your old engine instead of the trade?

X2. Make sure they will take the engine back if there is an issue with it. I ended up getting screwed out of $1000 worth of shipping and "re-stocking" fees on a POS used engine. A close inspection should reveal most major issues. But as long as you are dealing with a reputable source, this should not be an issue. FWIW, I ended up rebuilding mine, it was hard to find a machine shop that I felt was capable of duplicating the factory tolerances (this is not a small block chevy). It was a lot of work, a lot of money, but overall I'm happy I went this route, now I know exactly what I've got, and left very little to question.
 
Back
Top Bottom