What do You Think?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 29, 2003
Threads
117
Messages
785
Location
Bentonville, AR
I have noticed a little seepage around the VC on my 97 LX. Today I just noticed some leaking around the exhaust manifold. It looks and smells like oil however, I wanted to share a couple of pics just to get some opinions on what needs to be fixed. I think it is the VC gasket. The bolts are tight. I am not using any coolant and she runs fine, no smoke or strange smells.
oil1.webp
oil3.webp
oil2.webp
 
Not sure about the VC gasket for the 80, but my 60 had a rubber gasket that fit into a groove in the VC. My gasket was hard and cracked in several places, and no amount of tightening would help. Once replaced, no more leaks.
 
Just tightening the bolts may not be enough. Do a search to see that it is common to snap the bolts off while tightening, which was my first approach as well.

There are a host of other minor things you may want to do when its off, like the plug grommets. I searched the posts to better understand what the repair entailed, then called C-dan and he sent what I needed. I ended up having the dealer do the work with C-dan's parts bag (I have no garage and its winter in Maine) but that was fine, it bills as a one-hour task so it isn't a particularly expensive job. Most 10 year old 80s could use a new VC gasket and plug grommets assuming they are original.
 
I snugged my VC bolts after this same problem 3K ago. No problems since. There were 3 bolts loose. 2 on the passenger side rear, and the corresponding bolt on the drivers side rear.

Just snug them up, don't crank away on them. BTW, The VC bolt torque rating is in inch pounds, not foot pounds. Sorry can't recall the exact number right now. But it's not much.
 
Back
Top Bottom