What do I need?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 25, 2005
Threads
41
Messages
156
Location
Bradenton, FL
I have a 77 BJ40 and am looking to put disc brakes on the front. Unfortunately discs werent standard equipment on the diesel models (at least thats what I was told) in Costa Rica. I need to know if my 77 axle with drums is the same as a post 77 axle WITH discs. Is there a way to find out without tearing the thing apart? I was gonna post this in the Intl. forum, but I didnt find much doing a search in there.
 
i believe this is what ur looking for:

FJ-40 Brakes: In 1976, the FJ-40 went to front disc brakes; a ‘75 (and older) does not have this feature, however, our experience has been very favorable toward the drum brake system if it is working properly (usually new brake wheel cylinders will greatly improve the brake stopping power of these older models). For Great Prices... see Brake Parts

This is from cool cruisers of texas and heres the exact link to let you know the differences in years for the fj40 model years.

also search places like this ( search) and also look at SOR.com and just use google and type in your question. all sorts of stuff will come up. I know its probably really tough finding stuff out for the deisel models. but good luck. They are awsoem and many would be jelous of a deisel in the states!
 
oh and also to convert to discs, look up mini truck disc conversions. THats what was done on mine and I deffinatly will say it was a WORLD of difference! again good luck!

Rachel
 
OK, but does a 77 with 4 wheel drum brakes have the same front axle as a 77 FJ with front discs? If it does, then I can start looking for mini truck parts.
 
Conex said:
OK, but does a 77 with 4 wheel drum brakes have the same front axle as a 77 FJ with front discs? If it does, then I can start looking for mini truck parts.



The housings will be the same, you will need to open up the area the birf fits through on the axle housing with a grinder most likely...no biggie....when you have it tore down, you will understand what I am talking about....there are many threads in the FAQ on the specifics of this swap....


Collect the parts from a mini....knuckle out...including the lockout... and get after it!


Good luck!



-Steve
 
Back
Top Bottom