water can cleaning

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Smell bad like what? If they are slightly moldy smelling and you absolutely know that the only thing in them ever ever was water, you can use 1 part chlorine to 50 parts water, fill them up, let them sit overnight and agitate it from time to time. Then rinse and rinse and rinse. It also helps to fill them up with water after all the sterilizing and rinsing and let them sit for a full day in the sun, throw that water out and then resume regular use. If it is "solventy" smelling then don't try using it for water at all, just make it into a gas can and clearly label it as such so no one tries to drink the contents. HTH. :cheers:
 
I'm going to go with the solventy smell. I was wondering if someone knew of a fuel killing magic potion. Looks like I got free gas cans instead of water jugs. Thanks turbocruiser.
 
I'm going to go with the solventy smell. I was wondering if someone knew of a fuel killing magic potion. Looks like I got free gas cans instead of water jugs. Thanks turbocruiser.

Okay, if it is solventy you really have no choice, nothing will neutralize fully the fuel smell/taste/toxicity, again make sure that they are clearly labeled now especially if they have the "embossed" WATER emblem on them. Still, free gas cans are alright right? :cheers:
 
Baking soda

Smell is caused by bacteria. Kill the bacteria, kill the smell. Two ways to upset the PH inside a plastic vessel are with Baking soda, and/or vinegar. These are both at the opposite far ends of the acid/alkaline scale. Buy a 12 lb bag of baking soda and a gallon of white vinegar at costco. Baking soda is good for cleaning batteries too. Use the Baking soda first. Scrub and wash the baking soda out before using the vinegar, or else you will have the "Diet Coke/Mentos" reaction. Rinse well. All you should be left with is the original smell of the plastic. Wash periodically to keep fresh.
 
Smell is caused by bacteria. Kill the bacteria, kill the smell.

Not if it is a solenty smell as we already determined ... someone has probably put fuel in those can so they are now all fuel cans. :cheers:
 
Not if it is a solenty smell as we already determined ... someone has probably put fuel in those can so they are now all fuel cans. :cheers:

Absolutely, I agree with you. Any benzine based liquids cannot be addressed with my previously posted method. Since plastic is made from petroleum products, any fuel or benzine based liquids will "seep" into the plastic and always smell like benzine. My method is only for the water/bacteria problem. I've had some limited success using completely denatured alcohol (192 proof) but caution must be excercised because of the vapor/explosion volatility of denatured alcohol. Direct sunlight/fresh air circulated can sometimes help in these cases.
 
I have some stuff called PBW or powdered brewers wash for cleaning my beer fermentation tanks. It works like a charm for getting dried out, musty, moldy stink out of everything I've ever tried it on. I use it for camelback bladders, watter bottles, coolers, and about anything else that gets that wet for too long smell. If that doesn't work they are probably fuel cans.
 
Back
Top Bottom