Warn winch install arb winch bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 27, 2005
Threads
161
Messages
648
Location
ATL. GA.
Buddy has a newer model Warn winch, not sure the model number, he is trying to install into an arb winch style bumper on his 95 FJ80. Anyone have the instructions for this or know a source for the instructions.
 
the model number might be crucial here as i believe none of the XI models fit w/out modding......

other than that it should be pretty simple... Bolt the four feet of the winch down to the back of the bumper; check to see if he will have to realign the gear end to be able to reach the toggle. If so, just unbolt all the allen bolts and remove, lift end slightly (less than 1/4'') and rotate to desired position and reinstall long allen bolts. Red is positive and black is negative. the hard part is lifting the combo back on to the truck :D

( google is your friend ;) http://www.xplorx4.com/pathfinder/upgrades/warn/ )

http://www.tacomaterritory.com/~ccorley/Manuals, articles/Service_Manual_Work_Sheet_XD9.pdf
 
Last edited:
Back
Top Bottom