vsv help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2003
Threads
186
Messages
3,183
Location
Tulsa, OK
So, I decide I'm going to try one last time to fix my insuficient egr code (401 I think).

Already replaced everything else, so now I'm down to the VSV, which I was avoiding because it's so hard to get to.

So, I ordered the VSV for a '97 land crusier, though I have a '97 LX450 - should be the same right?

here's what I got....

it's a different VSV - different bracket - and most unfortunately, a different electrical connection.

So does the LX have a different vsv?
vsv part num.webp
vsv comparison.webp
vsv mount.webp
 
about the only plus side so far, is this is what my throttle botty looked like before cleanint - so at least it's not a total waste of time...
throttle body.webp
 
thanks Mike - thanks to your photos I figured out the problem is I didn't take out the vsv - I took out whatever this thing is in the blue circle

doy!!!!
vsv not.webp
 
I know some have actually extended the vaccum lines and remounted the VSV from above the intake and to a more accesible area, thats what I did and very happy that I did after the trouble I went through and getting the bad VSV removed.
 
I just ordered a VSV for EGR from Dan a couple weeks ago. The correct part number is 90910-12079. It is the same part for Toyota and Lexus. Make sure you replace all the old vacuum hoses while you're in there. Some of mine were dried out and one was really cracked and not sealing at all.
 
Back
Top Bottom