Valve gap .762mm

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 18, 2005
Threads
30
Messages
326
Location
Central Florida
My 94 FZJ80 has 250,000 miles on it and some exhaust valves need attention. The #3 cylinder has an exhaust valve with .762mm gap! :doh:
All of the intake valves are within spec but there are 9 exhaust outside of range (.356 to .381mm). I am concerned about driving the vehicle with a valve this far out of whack and pretty sure this is that tapping sound I've been hearing. Thoughts?

Thanks, ChuckD
 
Exhaust valve gap .762 - way out of tolerance!

Hey there, looking for some advice. Should I simply replace this shim to bring valve back to spec or does a valve this far off suggest a deeper problem brewing? I can do the shim but why just one valve so different? Oddly, on me spare '93 fzj80 I removed the exhaust cam (doing some experimenting) and pulled out the shim buckets and found several 1-2mm chips of some tan looking plastic tucked up inside a couple of them. Makes me wonder if the '94 has something like this going on.

Chuck

:cool:
 
Last edited:
Back
Top Bottom