Vacuum Line Location for Front Locker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 27, 2006
Threads
77
Messages
1,152
Location
The Land of Frank Rizzo
Just installed the front locking axle and recently received my front wiring harness from Dan, I found all of the electrical plugs but what I can't find is where the Vacuum line is located.

Do I just find an active line and tap into it or is there a specific line that I am suppose to tap into?

Thanks,
 
The lockers are electrically activated, not vacuum.

David Sword
 
There is a vacuum line with this harness and there was a vacuum recepticle on the actuator.

The vacuum line is there for a reason?
 
IIRC it plugs into a tube on the wiring harness bundle. It is a breather tube.
 
The wiring harness bundle contained a vacuum line and on the actuator assembly I found a plug for this vacuum line.

On the top side, I could not find anything for the vacuum line to plug into. This may be due to the fact that this LC did not have factory lockers on it, now it does.

I wouldn't think an actuator assembly would need a breather tube
 
DEFINITELY A BREATHER...

And here's where it ends up (rear locker and front locker):

Difflock breathers

cheers,
george.
 
Back
Top Bottom