vacuum advance with weber ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 10, 2006
Threads
87
Messages
2,188
Location
North Pole, AK
I have a 1971 Fj-40 with the original "F" motor and distributor(points type). I put a weber DGAS 38 carb on it and was wondering if I need to hook the vacuum advance hose up to carb or to the intake manifold? I had an old Rochester on the Cruiser previously and the vacuum advance was not hooked up. Need help so I can time it out and finish with my tune up. Thanks for the help.
Travis
 
Vacuum advance always goes to the carb. ot just any port, but the one which provids carb vacuum, not manifold vacuum.

Unless it has been swapped out, a '71 has a vacuum retard distributor, not a vacuum advance. don't hookk it up to anything.


Mark...
 
Stock is retard and it serves no performance purpose, just primitive emissions. Ignore it.


Mark...
 
So to piggyback this thread, since nobody seemed interested when I asked basically the same queston,

On a '78, I should hook the advance on the dizzy to the carb base?
 
You should connect it to ported carburetor vacuum. Unless you are maintaining full smog equipment. Then hook it up according the the FSM.


Mark...
 
Back
Top Bottom