Items added, check back once in a while: PM or email me your offers if going OBO.
PM me or send email to g b o w i e at s h a w dot c a if you are interested. No shipping, you come and pick up or find a Mudship.
- Now #175.00 OBO - $225.00 Right side Hanna Rack - Pains me to do so, but I have a storage unit on the way so the Hanna rack has to go. Slight modification of the bolt hole for the floor section of the rack, (for some reason on my truck) but other then that...great shape.
- FREE - Stilll have - old school analog 24-12v converter. No idea if it works...
- Sold Powershot Propane system. Has the hose hookup for the small bottles iirc. I'll have to dig out the box from storage for the full details, but it was set up for the 13BT. Bought off Crushers when he was retailing them. Never installed. Probably won't get around to it, so best it goes to someone who will use it.
- Sold on Thursday for a great project: 1" BJ/HJ/FJ body lift pucks, and bolts. They are machined from aluminum so I would use some truck inner tube rubber, or similar material between the frame/lift puck and the top of the lift puck/stock rubber mount so bi-metal reaction does not occur. Includes the hardware as shown in the picture.
- Gone - $FREE Used cable chains. Good for 29" tires or so.
gb
PM me or send email to g b o w i e at s h a w dot c a if you are interested. No shipping, you come and pick up or find a Mudship.
- Now #175.00 OBO - $225.00 Right side Hanna Rack - Pains me to do so, but I have a storage unit on the way so the Hanna rack has to go. Slight modification of the bolt hole for the floor section of the rack, (for some reason on my truck) but other then that...great shape.
- FREE - Stilll have - old school analog 24-12v converter. No idea if it works...
- Sold Powershot Propane system. Has the hose hookup for the small bottles iirc. I'll have to dig out the box from storage for the full details, but it was set up for the 13BT. Bought off Crushers when he was retailing them. Never installed. Probably won't get around to it, so best it goes to someone who will use it.
- Sold on Thursday for a great project: 1" BJ/HJ/FJ body lift pucks, and bolts. They are machined from aluminum so I would use some truck inner tube rubber, or similar material between the frame/lift puck and the top of the lift puck/stock rubber mount so bi-metal reaction does not occur. Includes the hardware as shown in the picture.
- Gone - $FREE Used cable chains. Good for 29" tires or so.
gb
Last edited: