Underbody!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
101
Messages
1,454
Location
The West
Undercoating
OK i really need some help. This cruiser is pulling my family apart. I need to go away to college. I need help and i need it now. Dont have money or time to do it at my house. Cant find a mechanic that will do it now for money we can afford. Sorry just venting. I am taking my cruiser to have it pressure washed next friday. When i get it back to Rons Shop me and my mom are going to be coating it with some kind fo rust preventative. Rust Bullet, Por 15 exc. are too expensive and the cheap spray cans from wallmart that convert rust into primer and crap arent going to cut it. I dont want to have to do this over again every year! I am going to do it right the first time and leave it the hell alone! Im sick off f&*#ing with it! Then also I need have some metal wealded in some places on the underside of the car by a professional and some dents taken out. Is that before or after rust preventative of the undercarriage? What order do i do this all in. Basically I am going to have it pressure washed and weald the holes up and take the dents out and rust prevent it and do and undercoating layer and that be done with her! So i need some help of some really good products top use.
 
well you mentioned the good products to use, i would suggest rust bullet because i have used it before, it can be thinned down and shot on, but i mean you can still go away to college with some dents and alittle rust, its not gonna kill ya...

you could always just drive it till you can afford to fix what ya need with the appropraite materials...
 
2nd that. And some of the rattlecan "undercoating" products actually attract moisture....but they look kewl. Remember that whatever you put on there temporarily will need to be removed at a later date when finances allow and you want it fixed right. But you're in Cali....there's no rust in Cali! The State of California has determined that rust is BAAAAAAD.


Chill, get good grades and make a lot of $$$$ to restore the cruiser.

ED
 
Do NOT use cheap "rust preventative". You'll live to regret it. The order of repair is clean, repair rust holes, clean, fix dents, clean, rust preventative, paint.
 
How bout osphos sp? Thats what I used and it works good and I'd imagine it is a little less then the other guys. Its green and the fumes are brutal but 24 hrs later the rust is dead. If you want a cheap undercoating that is also good buy a can of black durabak like $89 will coat the underside 2 or 3 times if not more and that stuff can take a beating. I'm a college student too so I feel your pain, I've been feeling it for 4 years now.
 
I second the Ospho. You can get it in any marine store, maybe other places too. It chemicly converts the corrosion back to its natural form, STEEL. It is also a great primer for painting.
Some dents that are not creased can be taken out by just heating the area with a torch and then rubbing with dry ice. It causes the metal to revert to its former pressed shape. DO NOT OVERHEAT THE METAL. The metal needs to be hot to the touch, not glowing, The paint does not need to be discolored. Heat the metal like a really hot summer day. Good luck, Clark
 
PUPTLAM said:
I second the Ospho. You can get it in any marine store, maybe other places too. It chemicly converts the corrosion back to its natural form, STEEL. , Clark
Well, kinda. It converts ferrous oxide to ferric oxide which is stable in an oxygen enviornment. Basically turns red rust into black rust. It is a great primer and it is phosphoric acid, period. The proprietary solutions may add something, but don't think you'll get anything more out of it except maybe some coloring. Just use some phosphoric acid...and rubba' gloves.

JMO

Ed
 
I CANT ARGUE WITH THAT!!! All I know is it turns the corroded metal black and it does not continue to rust. Degnol sounds like he knows his stuff, go with his answer.
 
Thanks cruiser guy. thats what i was looking for.
 
It may be difficult/expensive to get phosphoric acid in high concentration. However I know that there are several products out there that do.

I have used Suma Scale by Johnson Diversey (22% H3PO4, 10% HCL). I used it to remove mill scale from new steel. Restaurants and hotels use it to clean their equipment (dishwashers, etc). You could probably score a gallon of something like this by visiting some local establishments.

Make sure that you rinse off this stuff completely, paint will not adhere well if you don't.

I'm sure that you already know this, but it's worth mentioning... Industrial products like this are very dangerous. Wear a respirator, eye protection, and chemical resistant gloves.

Good luck to you...
 
I own a nice craftsman p- washer, I have used it a dozen times trying to remove all dirt from the undercarrage.


I rented a landa for 80 bucks....... It is basically a p-washer with hot h20 (300*f)
I thought most of the mud had been removed by my craftsman......


WRONG

the hot water washer really did the job......... there was lbs and lbs of dirt that came off.......

dirt my regular pwasher couldn't get

cost about 80 for 24hrs
 
Last edited:
thanks Id love to rent. My friend actually works at a place where you can rent them , but my parents would never let me do it at the house. OUr neighbors are weird about that to. Everyone in our neighborhood has new cars and they are kinda stuck up about that. I dont think I want to do that at Ron Diaz shop either. But yeah thats a lot cheaper. Id love to tho
 
We use phosphoric acid coating on alot of the hydroelectric dams we work on. It works pretty good in that exreme environment. Usually about two years. Don't skimp or you'll spend twice the money and too much work. Also accept, like I have, that there is no such thing as a rust free land cruiser. :beer:
 
yeah i dont think their is suck thing as a rust free anything
 
if your real broke, just buy some Rustoleom and Pressure wash the thing at a car wash..

Im Broke and Thats what i did.. Yea my junk's still rusty, and all beat to hell, but thats what makes it what it is.. in time i will do the repairs the right way..
Oh yea, buy another car to drive everyday, 3 cyl Geo or something..

Good luck..
 
Not to rain on your parade or anything, but it may be better to focus on your education/carreer before you start throwing your money into an old car. Old cars are nice, but your family and carreer are WAY more important. Anyway, I've found that I really wasn't able to waste an enormous amount of money on unjustifiable things until after I graduated from college (which only took me about 12 years).

If you don't have money for something like POR-15, I might just get some oil and spray the whole bottom of the truck with it once or twice a year, and then focus on your studies. or some rustoleum paint brushed on.

All just my opinions and offered as friendly advice.
 
I would agree with what others have said. School will take a lot of energy and attention. Whatever you are studying, put all your heart in it, work hard, get good grades and in time you will get to play with your rig. I too brought an old beater to college, a 1953 GMC pickup.......I never worked on it once, until I was out of school.
 
So...Okie....where are you going to school? And what are you going to study?


Now that we've solved the original problem.


Heh,

Ed
 
time to cut your losses okie.

take the $3k that you'll end up spending on your 40 and combine it with the $2k that you'll likely get when you sell your 40 and buy an 80 that will be trouble free while you're in school.

Then, 4 (or 5 as the case may be for some) years from now, sell your 80 and buy another 40 if you still want one.

The last thing you need to deal with is trying to figure out how to get to campus for that mid-term because something's wrong with your 40 and you can't figure out what the problem is...

fwiw, your snobish neighbors will accept the 80...if that matters at all.
 
Back
Top Bottom