U-Joints and mud

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 17, 2004
Threads
39
Messages
141
Location
East Tennessee
Replaced my u-joints right at a year ago, had a significant driveline vib last week and took it to the shop and they say my u-joints are shot? They seemed to think that it was a result of me being in the mud so much. I am probably in a really muddy fourwheeling situation once a month, but don't really bother to clean things up underneath when i'm done. Ya'll think thats enough to wear those things out in a year? For those of ya'll that spend a lot of time in muddy places, what kind of life are you getting out of your joints?
 
I only got like 210,000 miles out of my first set of ujoints. I'm in Alabama.

Atticus: Are you wheeling in mud atleast once a month?

To the op:
I can't say if the mud is the issue or not. After a day of mud wheeling, I set the sprinkler underneath to do the lazy man's way of undercarriage cleaning. I also squirt a little grease in the zirks and tube just for good measure.

BTW Are you keeping the ujoints well lubed on a regular basis? Also, did you replace the ujoints with oem or another brand? This info will help.

Buck
 
Atticus: Are you wheeling in mud atleast once a month?

To the op:
I can't say if the mud is the issue or not. After a day of mud wheeling, I set the sprinkler underneath to do the lazy man's way of undercarriage cleaning. I also squirt a little grease in the zirks and tube just for good measure.

BTW Are you keeping the ujoints well lubed on a regular basis? Also, did you replace the ujoints with oem or another brand? This info will help.

Buck

In that truck, I would say that I was wheeling in mud eight days a month from October to May, and almost never from May to October, so not really. But I had a very, very muddy truck, with lots of mud on it a good portion of the year.
 
carsonmac, make sure and use OEM u -joints and lube zirks when you get back from mudding...just a couple pumps of the lube gun is all thats needed...you will here the cap seals on u-joints pop when full.
I used after market u-joints on a lifted 85' toy...didnt last very long...OEM is only way to go.
good luck...Scott
 
Back
Top Bottom