Turn Signals stopped working, nothing apparent wrong though

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Land Speeder

InstaH8R
Joined
Jul 23, 2004
Threads
382
Messages
12,395
Location
Valley of the Heroes
Dang it! My turn signals have just up and stopped working in Cattywampus... both sides, and everything else is working. The fuse is OK, all fuses seem to be OK, I've even swapped it out just in case I was seeing things. I've removed the trailer wires some time ago, and recovered all the exposed wires, so that should be OK.
All my lights are still working as well.
What would cause the signals to stop?
I haven't found any threads pertaining to this...
I'm off to grab the 91 electrical diagram book....

Thoughts???
 
Crap. I took the hazard button out to put in the 96 for a Dif lock switch!
Does that need to be a complete circuit?! I'm about to go check!
 
Wait a minute. Did this start when you took out the hazard switch?

IIRC the switch needs to be plugged in, in order for everything to work correctly...
 
Wait a minute. Did this start when you took out the hazard switch?

IIRC the switch needs to be plugged in, in order for everything to work correctly...

You definitely IIRC'd! I went out plugged in the hazard button and VI - O - LA!

Preesh for jogging my damn memory! I always practice "What was the last thing i did" and I had completely forgotten that I pulled that switch the other day messing with the 96!
 
YES! Didn't even need to pull out the electrical diagram book!
 
Woohoo!!

homer-simpson2.jpg
 
Back
Top Bottom