turn signal switch assy

[buschmaster86]

Anyone know with what models the bj73 ones are interchangeble ?

mine is broke and tryd to solder the cirquit board and all but nothing works out now.

im talking bout the thing in the picture;

 

[buschmaster86]

here some pictures of mine;

 

[kbushnz]

Looking at Toyodiy.com its made up of modules...(based on your avatar)
Which bit is broken?
Then you can search the P/N data base to find other vehicles that use it....
http://www.toyodiy.com/parts/diag_ANCzOT.png

 

[kbushnz]

OK your photo's came up while I was typing...
Based on that I think this is what the P/N is and the models it is in....
http://www.toyodiy.com/parts/xref?v..._8401.4&s=84310‑60520&mU=on&mE=on&mJ=on&mG=on

 

[kbushnz]

Looks like you have had a major melt down? Did the fuses blow?
Some of the solder joints in the middle look dry / heated and melted away..
May have electrical issues to fix before you put in a new unit....
Hate to see that fizz out

 

[buschmaster86]

REPLACED WHOLE WIPER AND TURN SIGNAL HANDLE ASSEMBLY ON THE STEERING KOLUM AND EVERYTHINK WORK ECEPT THE TURN SIGNAL WONT BLINKER.

SO GONNA CHECK THE TURN SIGNAL FLASHER RELAIS

 

[sadam_husain]

I had to swap the whole switch assembly over on my truck when my wiper switch failed, my trucks 12v FJ and I think the colloum it came off was a 24v BJ and it all seemed to work fine so there probably isnt any difference in the assembleys?

 

[Gun Runner 5]

I had similar issues on my HJ75 and after several attempts to repair the switch ( all
unsuccessful ) I just replaced it with a new one.

 

[buschmaster86]

yes i also replaced it and after wrestling with the ralais and conectors got it working now !