Tuned up at 106k.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 5, 2003
Threads
298
Messages
3,662
Location
Saratoga Lake, NY
Just had a tune up done, some flushing done, and a new fan clutch installed (with new 6k oil, thanks to Landtank) At cold start up there is a big wooosh sound. Nothing like it was before. Pretty cool! The old one must have been at the end of it's life span.

CDan, thanks for the parts.

PS: what can I do to stop the tick,tick,tick, noise the radio makes from the new spark plugs ???
 
Make sure all your spark plug wires are correctly and tightly connected. This is likely arcing at the distributor. It is ticking mostly on FM?

Ross
 
I haven't tried any AM channels yet, but the FM side ticks a little. I'll check the wires.
 
Hey - mine does that too. I was checking the antenna under the dash to see if it was resting on another electrical cable. Are you saying my plug wires could be arcing and causing the noise?
 
Probably is the problem. Before the tune up there was no problem with the radio sound.
When did you first hear the noise?
 
I still have the radio tick... Tried moving the wires around the cap. Other than that what else can I do? I'm driving to Jersey this weekend, an 8 hour round trip. Does this effect anything besides radio?

Anybody???
 
Just to let you know, I went through the wire connections twice. The first time just a bit of wiggling and making sure they were engaged. The second time I actually unplugged and reconnected. That is what fixed my ticking.

If that that doesn't fix it for you, I would focus on the type of noise.

Ticking vs RMP/alternator whine?
Predominates on the low numbers of FM vs AM?
Did you/they replace the wires during the tune up?
New cap and rotor?

I really do think it is wire/cap/rotor related, but have been wrong on many occasions, ask my wife.

Ross
 
Did you put stock plugs in it, or some newfangled split-fire-put-hair-on-your-chest specials??

DougM
 
Thanks guys. Got time to take off the plastic covers and look at the wires. Problem was #4 wire. The only one you really can't see well. No more tick tick tick....
PS- Doug, OEM plugs only....
And on that subject, the old plugs must be from the factory... Denso k16RU? And the #6 plug had something different on it ( Japanese writing) not like the 5 other plugs. All the old plugs were in pretty good condition too.
 
Pat,

If 6 was different, likely some former mechanic was so lazy they decided it was just too far to reach. A few others have reported this over the years.

DougM
 
ok, so then the plugs were changed within the 100k miles. Well, all but the last one. #6 still looked ok though. Not too black, not to white, not wet...
 
And the #6 plug had something different on it ( Japanese writing) not like the 5 other plugs.


That is the special plug the factory puts in to crater our head gasket at #6 :grinpimp:
 
Tim, crater means???
 
Crater = destroy

DougM
 
oh, he he.. Then replacing it was a good thing?
 
Back
Top Bottom