transmission cooling question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 15, 2007
Threads
1
Messages
2
Sorry for the newbie question, no manual yet.

96 lx450

What is the cylinder mounted to the frame behind the front bumper with hydraulic lines?

My GF rammed into a tree mangling my bumper a couple of weeks ago. We drove it for a week with a mangled bumper and did not notice any fluid leaks. I then put an ARB front bumper on it. I still did not notice any leaks. Today she had ran it almost completely out of ATF fluid before noticing it did not want to go anymore. I came to the scene and saw that fluid was spewing out of the rubber hose that connects to the bottom of the ATF heat exchanger, it must have been pinched by the smashed bumper. Then while changing that hose out I noticed that the one of the metal lines connected to the top of the metal cylinder was pinched and broken off. The thing I am wondering about is why I did not notice any fluid coming out of this line when I added more fluid to look for the leak, is it part of the ATF cooling system?

Thanks
 
Yep, you have no A/C either.

DougM
 
What is the cylinder mounted to the frame behind the front bumper with hydraulic lines?
As others have said, this is the A/C receiver/dryer. You don't see any fluid leaking out because it has refrigerant in it and not oil/ATF.

Today she had ran it almost completely out of ATF fluid before noticing it did not want to go anymore. I came to the scene and saw that fluid was spewing out of the rubber hose that connects to the bottom of the ATF heat exchanger, it must have been pinched by the smashed bumper.
Hard to tell from this description, but this sounds like your transmission cooler that's mounted in front of the radiator. It's a small radiator-looking thing.

So it sounds like you have two items to repair.
 
Thanks for the info, it was late and dark, hard to trace ;)

I replaced the ATF line and filled up through the dipstick hole, I ran the engine and shifted through the gears and it appears to be full. Only problem is I have no reverse and N goes forward. All forward gears seem to work. Do you think the tranny is toast?

She claims no indicator light came on, I assume there is an indicator for low ATF, ever heard of it not working?

Thanks for you replies...
 
No indicator light for low ATF, just a over temp light. Sounds like your linkage might be knocked out of adjustment.
 
Back
Top Bottom