Transfer case swap questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2003
Threads
119
Messages
698
Location
Nice Side of the Wasatch Range
I've got a 79 4 speed and t-case, and I have a FJ60 4 speed and split case that has the spacer between the trans and case. What I want to do is run an older PTO winch set up on the older t-case but want the FJ60 4 speed. Is this doable? Are the bolt patterns universal, splines, etc??

Any help would be appreciated!
 
I am not aware of an input gear that is 19 spline that will permit you to use a one piece transfer case behind a transmission that originally had a split case.......and even if there was a gear like that, being that you have the later H42 with the spacer between the trans and tcase, the one piece case would not mate to that spacer.
 
There is the toybox adapter...

Put a marlin toybox between the FJ60 H42 and the older style t-case...

But why not just run an FJ40 H42 and t-case and be done with it?
 
Back
Top Bottom