Transfer case rebuilt this week - fluid question.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

mmw68

CruiserCrap.com - pimping crap for your cruiser!
Supporting Vendor
Joined
Dec 13, 2004
Threads
319
Messages
3,507
Location
Austin, Texas
Website
store.cruisercrap.com
So Iam having rebuilding the transfer case this week - I want to put mobile one 75/90 synthetic oil in. Can I do that right away....or do I have to fill it with non-synthetic first until the parts wear in?

Iam quessing I don't and can just fill it with synthetic - but wanted to check.

-Mark
 
Put in the full synthetic straight away. There is a magnet in the drain plug to collect any stray metal shavings (and you will ALWAYS have those).
I run full synthetic in all gear oil lubricated parts (diff's, transfer and tranny). I changed each as I had need to do work in them. There appears to be a slight mileage improvement as well.
 
Right now I have Mobil 1 75W-140 'cause it's going to be down here in Guatemala where a cold day is 55-60F. When we are back I might go to 75W-90 or something more in keeping with Canadian climatic conditions.
 
Back
Top Bottom