Tranny fluid drain.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

RFB

97 FZJ80 LIFTED SC DUAL BATTERIES,37s
Joined
Mar 7, 2017
Threads
353
Messages
3,748
Location
Nahant Ma.
Website
www.youtube.com
Ok heres one I havent seen adressed , I have an iron pig skid holding up my drivetrain I want to pull tranny pan clean filter etc. But I need to know the proper way to hold tranny and TC in place while removing the skid. pictures would be great. or not.
DSCN9861.webp
 
I’d say time to get the cutting torch and welder out and make the trans part of the skid plate removable for servicing.
 
I'd throw a strap over the frame under the TC. That should lift the TC or at least hold it. I'd use a 2" ratchet strap or HD thicker 1" not a cheap 1" is what I'm trying to say.it may drop a bit but then you can get a jack under it after pulling the skid.
 
  • Like
Reactions: RFB
I was thinking a floor jack under the transfer case rear outlet. But I do not want to find out this isnt enough.
 
I’ve supported mine there no problem. Pics in my cross member skid thread. It didn’t really look like you could get to there with that skid design? Maybe it was just the angle of the pic.
 
Last edited:
  • Like
Reactions: RFB
Big strap, jack stands, old crossmember??
 
  • Like
Reactions: RFB
Back
Top Bottom