trailer wiring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 14, 2007
Threads
2
Messages
2
Just discovered the forum. Awesome!

I've got a question and can't seem to find the answer in previous threads.

I've got a '96 80 which is stock. It didn't come with a trailer hitch but the consensus seems to be that all US 80's had the towing mechanicals, but some came without hitch and wiring.

I've ordered a Curt brand hitch and now am trying to figure out the wiring.

Between the bumper and the spare, coming out of the wiring conduit, is a female 3-prong t-shaped connector which is not hooked up to anything. Is this a plug-in for trailer wires? If not, why is it there?

The instructions for the Hoppy T connector involves getting into the floor and the side panels. Is this the only solution if this connector I have doesn't do anything?
Wiring Harness.webp
 
Last edited:
I believe that is for a non-US trailer harness. It doesn't have signal for something critical -- maybe the turn signals.

It seems that most 80's in the US have a port-installed trailer wiring box in the rear-passenger quarter panel.
 
I used a converter from Reese that plugged into a harness under the truck. I can't be sure from the picture if that's the correct plug or not, but the Reese converter eventually caught on fire. That was an exciting experience, and that P.O.S. was immediately removed. I have since installed the Hoppy converter that is described by photogod in post#3.
 
Agreed on all the above...That plug is what I used to power my rear license plate frame light on my Slee bumper. Pretty sure only one of the slots has power to it.

Get the Hoppy deal or similar. SUPER easy, don't let having to get behind the quarter panels scare you. They simply pop off (with some force) and if you bust one of the plugs they are easily replaced. The DS panel doesn't have to come off, just go in where the jack and stuff are and remove the jack etc and you find that plug.

Another suggestion depending upon what you are towing...Electronic brake controller for trailers with electric brakes and this little dealyo - Modulite - not endorsing this site just an example of what I am talking about and was first to pop up in search.

Easy to install as well and powers the trailer lights instead of relying of the tow rig's circuits to do so. Keeps you from blowing fuses, especially the brake light fuse :D (Hants knows all about this now)

Not sure if Hoppy sells something similar or not with their kit?

HTH

P.S. After you get stuff installed and one day you can't get your rig out of park...check the brake light fuse etc. Probably blown due to a short etc. Check your owner's manual for the emergency parking release "button" now if you don't know where it is.

P.P.S If you're looking for more info do a search on my user name for posts within the last 3 months. I was heavily into wiring up the LX for the CM07 Moab trip and some of that may help you with what I learned.
 
Back
Top Bottom