Toyota Stickers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
Joined
Dec 19, 2006
Threads
2
Messages
48
Hey all. Ive been selling these stickers on YotaTech.com and TTORA.com and just thought I would offer the same to you guys up here. Right now im offering two sizes. 4x5 for $5 and 8x10 for $10. Shipping is free. I can make a custom size if you wish me to. I can make them in pretty much any color but black, red, silver, and white seem to be the most popular. If you have any input or custom designs you want me to make, let me know. What do yall think? Any takers? PayPal is prefered if you have it.

kylesticker002.jpg


kylesticker078.jpg
 
Last edited:
Yes, I use a PayPal account. PM me for info.
 
kylesticker007.jpg


I can make liscense plates too but they are on a short supply. I only have one more chrome one left, a couple black, and i think there is a couple white ones too. Price is 35 due to the plates themselves. Wutcha think?
 
Anyone interested?
 
Bump. Come on guys, these are some real cool stickers. Since I have access to a sticker shop, I can make pretty much anything you want. What would YOU guys like to see. I was thinking about something mimicking an FJ40 front grill. Like the two round headlights, the border around, and the TOYOTA in the middle. What do you guys think?
 
Easy enough. I can make the Araco one. Might be until next week until I can get back to the shop though but Yes I can definetly do it. The sticker will be just the letters, no background. What sizes are you guys looking for. I can make um just as small or as large as you want them. Think ill stop at window banner size though. I can make them in red, green, blue, silver, white, black, orange, yellow, you name it. Any interest in these?
 
Thanks man, id appreciate it. Ill prolly make two sizes. One smaller one, 2x6 or somewhere along there and one larger. Im thinking that the larger one would be about the size of the one in the picture above. Stickers would probably be 5 for smaller size and 10 for the larger. Shipping is free. Sound good?
 
Kyle,

If you're going to make the ARACO stickers I would make two different sizes: one that would fit the sliding 3rd-row windows and the other size that would fill the rear/tailgate window (width wise).

I'm sure you were planning on this already, but I would want the material to be for the outside application, being able to withstand the heat, humidity, sun, etc...

Would these requirement affect your pricing?

Thanks for looking into it!

Mot
 
First off, I appreciate you takin time to help me out like this. At first I wasnt sure what you meant about the sliding window but I saw a LC on the road today and saw the sliding rear window. I like your ideas. One for the sliding and one for the rear window. Do you think you could get me sizing needed on both of these? Ill probably offer a smaller size then both of those just for good measure.

The material that I use is very durable and has no problem handling the elements. Ive helped make logos for the sides of vehicles, billboards, and stickers using this material. Trust me, you wont have any problems with it.

Pricing will be the same. I have to run all of the pricing through my guy first. The smallest size will probably be 5. Side window will probably be 10 (unless they are smaller then what it looked). One for a full size rear window will probably be somewhere around 20. How does the pricing sound? Ill try to make it as cheap as possible for ya guys.
 
I can get the back window measured for you, but I don't have the sliding 3rd-row windows, so someone else might do that for you/us.

The smallest size you're thinking of can be for the sheetmetal behind the front tires where a lot of ricers put their stickers on.:D

I'll try to measure the back window in a jiffy if I can and post back.

Also, there might be somebody who has the original sticker by Araco or know where to look at one online (if the pics LX_TREME posted above are not sufficient) so you could get the EXACT font and layout.

The pricing sounds reasonable, especially if you still sent them for free. But others might feel differently.;)

Anyway, let me go check on the back window now, if my boss lets me break free for a second while waiting for brown sugar muffins to bake.;)

Mot
 
Shipping will be free because Im just that nice of a guy :D I was searchin around and found this. This is what ill be using to make the stickers. I think its the orginal design or something very close to it. This look about right? Brown sugar muffins huh? Where do you work at?

aracoconcepts.jpg
 
I'm back!

The rear (tailgate) window dimensions:

At the top (I measured where the top heating/defrosting element line is):

Width: 105.5 cm (41.54")
Height of the glass: 47.5 cm (18.70")

For fun, I've also measured the 3rd-row glass, too:

Width (half-way between the top and bottom of the glass): 78.5cm (30.91")
Height: 42.5 cm (16.73")

Hope others can chime in and confirm.

Also, if you're going to do it, I would be interested in seeing the graphics before you proceed.

Anyway, HTH's!

Mot
 
Japan has entered the new year holiday season and my boss is still in her PJ's!:D

I just saw the art work. I think that's pretty much it (I don't notice any difference anyway).

The muffins look excellent, btw!
Gotta run to help out a family from my church move in a few minutes, so I won't be able to post for a little while.

Thanks again for looking into this.

Mot
 
Japan? Your in Japan? Well thats pretty cool!

That picture should help me out a bunch. It looks the everyones stickers so i guess that is right.

Are you gonna be interested in buying one of these? Do you think I should go through with making them? It takes alot of work getting the sticker right, all the edges and lines clean, and to get um printed out. Just wonder if its gonna be worth it. Thanks again!

ummm.. Merry Christmas or something like that! :D
 
Kyle,

If you go ahead and make them, I think I would purchase the big one for the back window, as well as a couple for the sliding windows.

I haven't decided if I would have them delivered to Japan or at my in-laws' place in Utah. But if I should have them delivered to Japan I would pay more for shipping, unless I buy enough to warrant free shipping.;)

Anyway, I imagine a few Mudders have checked out your thread when it was just the modified Toyota logo that you posted initially, but not bother checking it since.

So to get a better idea for people's interest, I might start another thread with a different title, such as "ARACO stickers, anyone interested?" or something like that so you would get more people's attention. You can decide after people post whether you would want to go ahead with making them or not.

BTW, personally, I would like to get them in white letters, rather than red or blue, but that's probably just me.;)
 
Status
Not open for further replies.
Back
Top Bottom