tow vehicle trans question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 15, 2005
Threads
59
Messages
661
Location
High Desert, SoCal
I need to pull the turbo 400 trans from my 1990 suburban/454 . I am thinking that there are 5 bolts that hold the trans to the engine. Does anyone know how many trans to engine bolts there are total? The engine is pretty tight to the firewall and it's hard to see and reach. I want to make sure they are all out before I start trying to separate them.
Thanks Brad
 
I was thinking there were 5. 2 on each side and 1 in the center up high. Sorry for posting in the wrong area.
 
6 on the bell housing, 3 on converter, 2 on the trans mount, 2 cooling lines, 1 linkage, and electrical plugs.. if you pulling it by hand (no trans jack) make sure you dont knock the dip stick guide tube out when your dropping it, unless you like AFT showers..
 
Back
Top Bottom