Timing gear noise

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 25, 2004
Threads
33
Messages
189
Location
Pa.
I've been hearing a squealing noise coming from the timing gear area. It's not all the time. First I took both belts off and still had the noise. I put new belts on and no change. I tried the stethoscope and narrowed it down to the timing gear area.
I've read other posts and it could be the cam thrust plate is worn. Again,this not all the time. It doesn't really bother me. I'm trying to find out if this could turn into a major problem if I let it go for awhile. I'd rather do this as a winter project.
Thanks for any info!
 
cruiser 004.webp

cruiser 006.webp
Could be the seal from the pullys is worn. The spring might have eaten through the rubber and is rubbing in the shaft. I doubt its the thrust washer
cruiser 004.webp
cruiser 006.webp
 
Thanks Big B! I think I'll just keep running it until winter. That looks like it's going to be a pain to fix!
 
I just changed the oil and still have the filter,so I'll check it. The oil itself is clean and no metal that I can see. Thanks for the info!
 
Waterpump appears to be ok. It sounds fine when I use the stethoscope. Same with the clutch and throw out. Thanks for all the help! I'm just going to run it and wait and see.
 
Back
Top Bottom