Time for some maintenance - suggestions?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 31, 2015
Threads
14
Messages
53
Location
Santa Rosa beach, Fl
Well gents, my 16 year old son liked his old man's pig so much he decided he wanted his own. We picked him up a nearly identical 92 for a pretty decent price (2600 USD). He can't drive it till the end of February which gives me the extra vehicle I need to give my cruiser some much needed attention.

1st order of business is a new water pump, it is leaking ever so slightly when it gets cold out.

2nd, I'm beginning to notice white wispy smoke when I fire her up, which goes away when it's warm, so I'm going to go ahead and replace the head gasket.

So, the question for you all is what should I do while I'm in there? If you had a month to take things apart and clean things up what would you do?

Keep in mind I'm not a bank and though I'm mechanically inclined this will be my first attempt at major items. I know wheye your brains are going with this. Lol.

20160108_142215.webp
 
I personally wouldn't jump to conclusions with some little white smoke from the exhaust being caused by a HG failure. Some white stuff when cold is pretty common. Also the 3FE's are not prone to HG issues like the 1FZ-FE.
 
Yeah Id just run it, don't change the HG yet... Unlikely to be your issue imo.

Change plugs wires rotor etc or at least inspect. Check intake plumbing for cracks. Check oil levels, smell your trans fluid, change engine oil and filter, check tires, check wheel bearings, check brakes, check steering for play, the usual...
 
While your replacing the water pump (big PITA), might as well do all the coolant hoses and flush the engine block (drain cock on driver side below the exhaust manifold) and you might want to double check and make sure your radiator is solid before putting it all back together. You could also refresh your fan clutch silicone with some 10,000 cst fluid. Don't forget the coolant hoses from and to the oil cooler. And a valve adjustment, and how are the knuckles? Ok that's enough for now.
 
Back
Top Bottom