Time for plugs & wires . . .

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 20, 2009
Threads
3
Messages
113
Location
D-Town, Colour State
Mornin Gang,

Its time to change the plugs and wires on my '93 cause they have not been done as far as I know:whoops:. Never done them on a cruiser :doh:- are they easy to do or no ? Bigger question is which set to get ? Is one brand better than another. My mechanic wants to sell me some but I have no clue whats good or bad for plugs or the wires. ANY help would be awesome. Might even have pics

KRAZI
 
OEM is your pal, if you can put it off contact CDan for best prices.:cheers:

and:flipoff2:welcome
 
I just did this on my truck... OEMis the way to go... the last plug near the firewall is not the easiest, but not as bad as other cars I have done.

I took out a set of PulseStar plugs (P.O., not me) and went with OEM's from CDan...

Call him, best prices anywhere. If you go with OEM's they are labeled as well so there is no confusion to the rotor.

Get the cap. rotor, plug wires, and PCV valve & grommet, but make sure to read the FAQ on the PCV valve so you don't drop rubber into your engine!!!
 
Thanks mucho for the tips gang. Spent bout half hour calling the local auto shops in denver and carquest is close by and said the same thing bout oem, everything is exactly the same and plat plugs are just a waste. Would like to buy from CDan but I need the truck back on the road before the weekend. Im glad I asked bout doing the plugs, my dad has an old 77 malibu station wagon that has ONE bad plug and is always the first one to get done.
vjr021 I willl look into the PVC valve - rubber no burn well.
 
I would also recommend getting both PCV hoses as well.

X2 on the PCV grommet
X2 on the #6 plug being a pain but not as bad as some say

Use dielectric grease!
 
WHen I picked up the truck from my mechanic, HE told me that he just went ahead and did everything that needed to be done. I had a few leaky hoses, a leak point at my power steering pump cause it went bad and plugs and wires. He replaced the pump hoses stopped the leak and did plugs wires for just bout a grand.
 
WHen I picked up the truck from my mechanic, HE told me that he just went ahead and did everything that needed to be done. I had a few leaky hoses, a leak point at my power steering pump cause it went bad and plugs and wires. He replaced the pump hoses stopped the leak and did plugs wires for just bout a grand.

kind of shady IMO. unless you know and like the guy, or you two had a prior agreement that he could fix anything he came across, i would look for another mechanic
 
Re: OEM plugs

Wow! OEM plugs are copper?! How long do they generally last then? It's been my experience that copper plugs don't last any longer than about every oil change, but that was with a turbo'd vehicle running 18 pounds. Can't see them doing much better in the LC though....

Is there a platinum or iridium equivalent?
 
Wow! OEM plugs are copper?! How long do they generally last then? It's been my experience that copper plugs don't last any longer than about every oil change, but that was with a turbo'd vehicle running 18 pounds. Can't see them doing much better in the LC though....

Is there a platinum or iridium equivalent?

In one sense, it is true copper don't "last" a terribly long time compared to platinum. There are toyota platinum plugs, but they cost more than 3x per copper BUT do not last 3x longer than the copper plugs. Copper and platinum provide equivalent sparks, in fact, I think copper should theoretically (correct me if I am wrong) produce better sparks. But really they function identical for the recommended lifetime of each.

More info -- https://forum.ih8mud.com/80-series-tech/126872-spark-plugs-platinum-not.html

The gem from that thread --

Stock plugs are not platinum. You can run platinum if you want. The primary advantage is extended replacement intervals.
The interval for standard plugs is 30,000 miles and platinum gets you 60,000 miles. OEM platinum plugs are about 4 times the cost of OEM standard plugs.

I run Platinum plugs that are one step colder because of the blower.
 
Back
Top Bottom