Thule 300 Risers - Door Clearance Issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 31, 2013
Threads
20
Messages
102
Location
Marietta, GA
Has anyone had an issue with the Thule 300 gutter mounts coming in contact with the doors. I just picked up a set and am finding I cant close the door due to interference with the gutter mount.

Thanks - F
 
IMG_9697.webp
Mine have been fine. Where are yours mounted to cause interference?
 
My door rubber floppy thing would scrape the gutter feet but otherwise it was close but nothing hit.
 
My rubber touches the feet but it passes by and seats on the door jam like it's supposed to.
 
Oddly enough, it fits fine on the drivers side, but interferes with the top of the door on the passenger side. The rear risers are fine as I have them over the sliding rear windows. To solve the issue on the front, I did a little tweaking in a bench vice and mounted them directly above the B pillar. I works, but I am not crazy about it becuase it puts the cross bar directly above the sunroof. Oh well.
 
Like I said I don't understand what is interfering. Is the rubber getting marred up or not allowing your door to close?
 
On the driver side, the riser makes contact with the door rubber, no big deal. On the passenger side, the door makes contact with the riser to the point the door will not close without scraping on the riser.
 
That is interesting. I did remove my gutter trim, that plasticky black cracked crap that is supposed to make the gutter match. Maybe that is why I never had interference. Maybe see what Thule has to say about it. The 300's are recommended for our vehs.
 
Thanks. I thought about tryinghto remove the plastic stuff on the rain gutter but was worried what was underneath.
Should be solid metal gutter! I think it looks better without the faded plastic.
 
You may have a bent foot. Swap it with the other side that fits fine. If it hits, your foot is bent. If it doesn't, you may have an issue with the gutter. Regarding the strip itself, I found a post with a guy who covered the entire strip in a 10' by 12" strip of outdoor black vinyl which made it look good as new again.
 
Back
Top Bottom