throttle cable

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 25, 2005
Threads
23
Messages
161
Location
NC
Website
www.svmatch.com
Well, had my first break down today. Driving along and my throttle cable snapped at the end by the carb. I have a weber 38. Trying to track down a throttle cable for it. I bought some similar cable and I am going to try to route it through the plastic housing as a temporary fix until I can find an orig to fix. first landcruiser.
 
Welcome.


Any of the vendors that sell the Weber carb will be able to supply you with a cable.


SOR, TPI, JT Outfitters...etc.


good luck!


-Steve
 
those :o throttle cables errr i broke three until i tossed that weber junk pedal in file 13. took a stock 40 pedal built bracket on firewall and at carb used auto zones specter cable kit. have not broken another one since. over time those weber pedels tend to bend down to the floor. must be made of silly puddy. i can not tell you how many times i had to reach down grab the pedal and bend it back while driving. no problems with the stocker thow.
 
I fixed the throttle cable this morning. I went to autozone and bought an accelerator cable. Same cable as the cable running on the inside of the weber throttle cable. Had to strip the weber carb cable of the hard rubber outer coating and threaded in the accelerator cable. The accelerator cable has a metal piece on the end I was able to attatch to the pedal to work. Can't tell the difference. Parts at autozone cost me $10 verses 30 bucks from online for the weber throttle cable without shipping.
 
Glad you got it fixed....



The 'silly puddy' pedal is a toyota piece....least the ones that I have installed have been....


:beer:
 
Back
Top Bottom