The ULTIMATE audio experiment begins!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 12, 2005
Threads
212
Messages
1,707
Location
Seattle, WA
Website
www.4wdtoyotaowner.com
I've been compiling components and soon it begins. Goal: keep it Toyota/Lexus/Scion rather than simply run to Crutchfield. It's a project, not the "logical" thing to do, remember before flaming. Let's run down the candidates. New speakers from Panasonic and Blaupunkt are going in the doors and dash area. Rear roof stay stock, as does OEM sub.

Here is what we have amassed for testing.

1. Hook up the OEM deck to the amp from a 2002 Tundra.

1B. OEM unit to a 220W amp from the All-Trac Celica System 10.

2. Install Scion HU (Pioneer) model T1808 and stay stock.

3. Install Nakamichi amp (4x40, 1x100) from a Lexus on the stock system, or B) with the Scion HU.

4. Scion HU only, mated to a Pioneer sub amp out of Lexus SC300 to give the stock sub more juice than the piddly OEM unit.

5. The kicker: Mark Levinson amp from a 2006 Lexus GS. 5.1 stereo, 330 watts, originally powered 14 speakers connected to the Scion head unit. The toughest, probably, due to speaker ohm differences, digital circuitry, etc...but worth a try.

Components have been sourced and are arriving in the next few weeks. Will report what we find.
 
Tundra amp

2002 Tundra amp
b727_1.webp
 
Nakamichi amp

Nakamichi amp from a Lexus
fed9_1.webp
 
All-Trac System 10

220W from a Celica
c65f_1.webp
 
Pioneer sub for the rear

from a Lexus SC300
AMP-A70140_1.webp
 
The Mark Levinson

Holy crap this amp kicks ass!
1MLTop1423.webp
 
Pioneer sub amp out of Lexus SC300 to give the stock sub more juice than the piddly OEM unit.

I'm real curious to see how well the stock sub sounds with more juice.

Sounds like an interesting project.
 
Why not upgrade the sub? Scion offers a 6" Pioneer that can handle, IIRC, 200W.
 
Before you do anything, I recently did the Scion upgrade. I then replaced the door speakers with some Pioneer dual 5.25's and for S#%#%$ts and giggles I borrowed a friends 8" powered bazooka from a buddy to try out. Its sounds awesome. My roommate used to work at a high end stereo shop here in northern Va and was amazed when he heard it. So I got on EBAY and snatched one up for $50 plus shipping (got lucky it was brand new, just a older model). So now I roughly have $170 and a killer sound system that looks stock. No amps to wire, really simple. I'll post pics of how I got the tube mounted tomorrow. Just a thought!

:cheers:
 
I will not flame you but there are some facts you should take in consideration:

1) Because of our front and rear door speaker limitations you should filter the low frequency before they reach them, that should provide a cleaner and undistorted sound putting less stress on your head unit amp if you go through this way.

2) No matter how much power you feed to the OEM sub speaker it allways will sound terrible.

I love the Scion but unfortunately it doesn't have a sub out or line out to properly drive the external amp of your choice and that Mark Levinson looks sweet but it's something designed to be enjoyed on a quiet ride.

If I would be you, I would try first to fix the sub problem at all and then go for the best door speakers and by the way I would not waste a cent in dash speakers because their akward location and angle, I would put instead a component set in the front doors with adjustable angle tweeters as high as possible (mine are in the middle between the handle and the dash with the door closed). Once you take control of the speakers then any head unit will sound fine.

Ask anybody with knowledge and experience in home and car sound and allways they will say that the key is good speakers.
 
Last edited:
Before you do anything, I recently did the Scion upgrade. I then replaced the door speakers with some Pioneer dual 5.25's and for S#%#%$ts and giggles I borrowed a friends 8" powered bazooka from a buddy to try out. Its sounds awesome. My roommate used to work at a high end stereo shop here in northern Va and was amazed when he heard it. So I got on EBAY and snatched one up for $50 plus shipping (got lucky it was brand new, just a older model). So now I roughly have $170 and a killer sound system that looks stock. No amps to wire, really simple. I'll post pics of how I got the tube mounted tomorrow. Just a thought!

:cheers:

I'd like to see your setup!

Cheers,
 
I will not flame you but there are some facts you should take in consideration:

1) Because of our front and rear door speaker limitations you should filter the low frequency before they reach them, that should provide a cleaner and undistorted sound putting less stress on your head unit amp if you go through this way.

2) No matter how much power you feed to the OEM sub speaker it allways will sound terrible.

I love the Scion but unfortunately it doesn't have a sub out or line out to properly drive the external amp of your choice and that Mark Levinson looks sweet but it's something designed to be enjoyed on a quiet ride.

If I would be you, I would try first to fix the sub problem at all and then go for the best door speakers and by the way I would not waste a cent in dash speakers because their akward location and angle, I would put instead a component set in the front doors with adjustable angle tweeters as high as possible (mine are in the middle between the handle and the dash with the door closed). Once you take control of the speakers then any head unit will sound fine.

Ask anybody with knowledge and experience in home and car sound and allways they will say that the key is good speakers.

Good feedback. Thanks. We may go MB Quarts. But the project idea was to go cheap rather than audiophile, I know, but we are wheelers so perfect sound isn't goal. Still, points well taken!

Thanks!
 
4WDtoymag, here you go, great sound and a low budget. I mounted the tube verticle so as to not loose any floor space, plus I think it looks cooler( kinda like air tank :doh:). Well here are some pics. The door speakers are JVC (dont know model I threw out bx) from Walmart, they have the same ones at Ciruit City but were $15 more. I put these in front and rear doors. I disconnected dash speakers because my knees dont have ears and I left the rear roof speakers alone. Hope this helps out.

:cheers:
IMG_1582.webp
IMG_1584.webp
IMG_1585.webp
 
i use sony speaks up front with the small bazooka tube for bass. It sounds great and the sub only has one plug to hookup all the connections. this makes it easy because I use large hose clamps to clamp it to the 3rd row seat bar in the back. Meaning I can remove the sub, in a matter of minutes, from the cargo area for either more room or to use the 3rd row seats.


All out of the factory deck, although i want a new deck bad.
 
Good feedback. Thanks. We may go MB Quarts. But the project idea was to go cheap rather than audiophile, I know, but we are wheelers so perfect sound isn't goal. Still, points well taken!

Thanks!

David: do a search in the forum, for the subwoofer using the OEM location with a concealed, made to fit case, as I did on mine. You will find plenty people who fabricated or got them.

I know it's a lot of work, but it's worth every penny because your cruiser will look cleanest and you will save a ton of space.

I was looking at the slow91 location behind the third row seat and I bet it sound great but for my trips this is a precious space were I throw the last minute items once the cruiser is fully loaded. I need every inch of space and that's why I concealed my sub in the oem location and the sub power amp is concealed in the driver side rear quarter (amps under driver o passenger front seat is a no no, because they take this handy space and could get wet when crossing water paths).

For 20 years I had a shop which specialized in antitheft devices and alarms so I am at all against removable sub cases because I am not in the mood to remove or reinstall it every time I need to carry something unspected, no matter how fast that could be, and unfortunately sooner o later somebody will break in and you will make his day.
 
Last edited:
Update: talked to a guru of Toyota/Lexus audio. Seriously. This guy was like one of the Lone Gunmen from the X-Files. A genius at this stuff. He's like Marlin, he knows all the ins and outs. He's going to build a harness to match a 20-pin Toyota unit, probably JBL, to work with the Mark Levinson amp. A T1808 Scion will not work as it has a 6/10 socket in back, not a 20-pin.

This is going to rock.
 
Last edited:
Update: talked to a guru of Toyota/Lexus audio. Seriously. This guy was like one of the Lone Gunmen from the X-Files. A genius at this stuff. He's like Marlin, he knows all the ins and outs. He's going to build a harness to match a 20-pin Toyota unit, probably JBL, to work with the Mark Levinson amp. A T1808 Scion will not work as it has a 6/10 socket in back, not a 20-pin.

This is going to rock.

Just for curiosity I disassembled a 1807 Scion/Pioneer HU and with the service manual it will be very easy to hook a line out for the sub (and the F/R line out if you would like to add a 4 channel external amp) but a good electronic tech can figure it also. By the way I noticed that the motherboard had already the ipod section control but without the parts and the socket, so seems is the same mother board as the 1808.

As I recall the JBL 20 Pin HU provide the F/R and Sub line out (as a balanced line out) to feed the Mark Levinson balanced line input which is a way to improve the N/R and reject interference from the OEM vehicle electrical circuit.
 
Back
Top Bottom