The Lift Switch Project

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2006
Threads
48
Messages
280
Location
Charlotte, NC
Here is the deal. I have 2 97 LX450's the nicer of these is the one my wife has adopted as her own. She drives it the majority of the time. It is also the one with 37" tires 6" Slee lift and 1" body lift.

She is a small, 5' 2" and 114 lb's. And she hauls an infant and a toddler boy around in it with her. It has become a pain in the ass for her to jump in and out of when she is running her daily errands and such.

The 2nd of these is the one that I have had the longest. It is on a stock suspension with 33"s and factory E-lockers. It has much more miles on it, with a rougher interior and is the one I would really like to have more beastly. It would be easier for me to just throw a 3" OME kit on it and give it to her but... Of course she likes the nicer of the 2 trucks. And I am less inclined to take the nicer one out in the woods and down tight trails.

My question is this. How difficult would it be to remove and replace all of the 6" Slee lift components from her truck and replace them with the 3" OME components. And then put the 6" lift on my other truck.

And can anyone think of the blow back that may occur by doing this? Or the little things that I may miss in the process.

I know I will have to switch out both of the double cardan drive shafts and related running gear. I will be leaving the 4:88's in the one truck and replacing the stock gears with 5:29's in the other.

As I said before. Can anyone think of the draw backs on this. If I don't do this, she is going to make me get her a different SUV and she is looking hard at the Jeep Grand Cherokee. That will make it unnecessary for me to have 2 Cruisers...

Thanks for the forth coming input. :beer:
 
Back
Top Bottom