Thanks Geico

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 4, 2009
Threads
21
Messages
238
Location
Boise, Idaho
Last winter was a record snow year and unusually harsh here. Terrible roads and our city doesn't plow well. My neighbor slid into my parked Cruiser one morning. It dented the rear quarter slightly, broke a tail lite and scraped the rear bumper. I didn't care about the scrape on the bumper but did asked them to re-powder coat it. The adjuster said they didn't know how to do that so I had to get a quote from Luke on a complete new 4x4 labs bumper shipped to Idaho. I told the adjuster that seemed like too much and she wouldn't have it and wanted to write a check. All in for damages, I got $4,400 from Geico for a tail light, small dent, a broken trim piece and scraped bumper which somewhat matched some rock rash on the other side.

I've been wanting to pull the trim for awhile now and this was as good as excuse as any.

Just had a shop Line-X my roof, slider, rockers, and bumpers. I wanted a color match and they did it well. I had rust in the roof rack holes and some dents from an unfortunate bump on a tree with my Wilderness rack so I pulled all that and sanded and bondo'd. The sliders were covered in rust and the front and back bumpers were terribly oxidized. The body trim was backed by 20 years of mud and dirt. I was surprised how much was back there.

The shop used metal tape and unfortunately in bright sun, you can see the holes a little. I don't have the skill nor wanted to pay someone to weld them up. It's not bad but it's not perfect either. The total was $300/bumper, $300 for the pair of sliders and around $1,400 for the body.

I've had some electrical issues lately and after sitting a couple days, it wouldn't start. Turned out the starter was hashed and needed a huge draw to turn. The wiring from the PO had some gremlins so needed to be redone. I beat on my Cruiser running raft shuttles and there was some deferred maintenance that needed done there from last season too.

I took the cash and did the Line-X, new shocks, two new batteries and a block, new starter, new u-joints, new rear brakes, all fluids flushed, new snorkel head (Donaldson was brittle and cracked) new plugs, wires, and cap, some exhaust hangers welded, new belts and hoses, and had a few bucks Left for beers while working on it. I didn't feel bad paying Line-X with house money on this one.

Bruneau1.webp
Bruneau5.webp
DSC01966.webp
IMG_3870.webp
IMG_3877.webp
 
Last edited:
Finished. I still have some other things I'm working on. A Back Bay Custom tailgate lid is on it's way. I'm going to put new rubber on after a spring in the desert. It's about time to look at control arm bushings and window trim.

IMG_4727.webp
IMG_4733.webp
IMG_4738.webp
IMG_4740.webp
IMG_4739.webp
 
Put new shocks on and took it for a spin up behind my house. Rusted shock bolts are easier with a grinder. I spend an hour with multiple wrench combinations because I thought it was a cool challenge. Turns out cool challenges are for morons and angle grinders with cut off wheels are easier.

IMG_4745.webp
IMG_4747.webp
IMG_4753.webp
IMG_4756.webp
 
Nice!
 
Back
Top Bottom