th350 installation what 2 do?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It's really easy.

A cable shifter will let you mount the shifter where ever you want.

You will need a flexplate to bolt to the engine and the torque converter.

The trans coolant lines need to go to a remote trans cooler. You can buy them through most parts sources. It mounts in front of the radiator.

The vacuum modulator needs to go to a manifold vacuum source.

Advance Adapters and parts Mike Parts sell the adapter to go from the TH350 to the Cruiser tranfer case.

You will need a custom transmission crossmember, custom driveshafts and you may need to cut out and reweld the rear tube crossmember on the frame.

You also may run into front driveshaft clearance issues. Both Mark's and AA have solutions for that.

Your rear driveshaft will be very short in a 40 series unless you move the engine far forward and at least flip the rear springs
 
Back
Top Bottom