Temporary paint protection

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 27, 2006
Threads
45
Messages
2,099
Location
Texas
I haven't had the chance to try this yet, but it seems like it should work for scratch protection. Temporary paint that will not wash off without soap or high pressure.

My paint will never be what it once was before it started to venture off of pavement but I have seen much worse. It is still worth protecting. If I was just startin' out or IF I ever decide to get a new finish this stuff might be the ticket...
 
Ask -B- about his Precious "special wrap" :D

I remember Dan had actually posted up some pics of it too. Search under "precious".
 
Ask -B- about his Precious "special wrap" :D

I remember Dan had actually posted up some pics of it too. Search under "precious".

I searched but I am rollin' snake eyes... :frown:
 
Ask -B- about his Precious "special wrap" :D

I remember Dan had actually posted up some pics of it too. Search under "precious".

Piss poor memory Tom. :rolleyes:

The truck is named Pristine, not "precious."

Sheesh.

-B-
 
The 3M vinyl is the thing that I would try if you want to protect the paint. There are installers in CA that have done full vehicles and I heard of a new Vette in Denver that has the full body treatment. The 3M stuff would be a bit spendy but less than a repaint.

Be aware that it doesn't help when you test it with rocks. BTDT. :D

-B-
 
Ahhh yes. The rocks. I need sliders. I wish I would of got those a long time ago...

The paint I am talking about is temporary and it is in a shaker can. You can spray on right before you get into the BRUSH and its like 5.00 a can. When you are done you just wash it off with high pressure soap.
 
Ahhh yes. The rocks. I need sliders. I wish I would of got those a long time ago...

Sliders didn't help me. This was a BIG rock.

That paint stuff is not gonna help you when you need it. Most paint "scratches" on your 80 will buff out, especially if you have a good wax on it.

What you're worried about is heavy thorny type brush and sharp sticks. These will go right into the paint and down to bare metal and that spray on stuff won't cut it. However, the 3M paint protection film will work in these cases (just not with rocks... :D)

Another guy uses magnetic strips like they use on fridge magnets. He bought 2' wide strips and puts it along the sides. Bit too much of a pita for most but he claimed it worked great. Do a search if you're interested.

-B-
 
Sliders didn't help me. This was a BIG rock.

That paint stuff is not gonna help you when you need it. Most paint "scratches" on your 80 will buff out, especially if you have a good wax on it.

What you're worried about is heavy thorny type brush and sharp sticks. These will go right into the paint and down to bare metal and that spray on stuff won't cut it. However, the 3M paint protection film will work in these cases (just not with rocks... :D)

Another guy uses magnetic strips like they use on fridge magnets. He bought 2' wide strips and puts it along the sides. Bit too much of a pita for most but he claimed it worked great. Do a search if you're interested.

-B-

Summit actually sells camo magnetic sheets (whole panels) for brush protection. I have only seen them in their catalog.

As far as being able to buff out the scratches. While I'll admit I haven't yet tried to do this I would rather be able to simply spray protection on that washes off when I'm done rather than having to spend a couple hours or more buffing :frown:. Chances are that I will leave the scratches (I haven't buffed my cruiser out in 5 years-it still looks good other than the clearcoat level scratches) rather than spend the time buffing :frown:.

Now after I am done buffing (whenever this may happen) I may try this temp paint before I go into the brush. I will try to pick lines that don't further dent my rockers or doors... ;)
 
Ahhh yes. The rocks. I need sliders. I wish I would of got those a long time ago...

The paint I am talking about is temporary and it is in a shaker can. You can spray on right before you get into the BRUSH and its like 5.00 a can. When you are done you just wash it off with high pressure soap.

I'd go with something other than temp paint, like an adhesive vynil. I think that if you were to get a scratch over the temp paint that actually digs into it and hits your original paint, it might bury the temp paint deeper into the scratch. Just a thought. Am I making sense?

Watch out with adhesive vinyl too, stick to a known brand like 3M and ask the sales rep about the maximum time it can stay on your vehicle, take temperature into account, too. Some materials will ruin your paint when removed if you leave it on too long or through severe temperature changes.
 
I'd go with something other than temp paint, like an adhesive vynil. I think that if you were to get a scratch over the temp paint that actually digs into it and hits your original paint, it might bury the temp paint deeper into the scratch. Just a thought. Am I making sense?

Watch out with adhesive vinyl too, stick to a known brand like 3M and ask the sales rep about the maximum time it can stay on your vehicle, take temperature into account, too. Some materials will ruin your paint when removed if you leave it on too long or through severe temperature changes.

Too expensive (too many other mods to do still). I am worried about the hundreds of surface scratches that I can't get out without buffing :frown:.

Not worried about the deep scratches as much. Only expensive vinyl or magnet sheets will protect against those. You will still get scratches on the street. Can't stop them all...
 
The best "protection" I have found is a good coat of car wax, the wax lubes the surface and somewhat lessens the damage from small branches. Buffing removes most of them, but it also removes some paint, so I let them build up and buff once a year or so.

In a previous life I owned a tool truck, always got tons of branch scratches on that big pig! We used mop and glow or Future floor wax, it's water base acrylic paint, spray it on and instant shine. When it got beat up wash off with ammonia soap and reapply, sure beat buffing that acreage. :eek:

It didn't rinse off clean, the residue would get gummy. I don't think it would be a good thing for an 80, would probably gum up locks, windows, etc?
 
griotsgarage.com sells a spray rubbery coating. you spray on the front of the hood for example, and peel it off in one sheet when you're done. maybe that is what you are looking for
 
Piss poor memory Tom. :rolleyes:

The truck is named Pristine, not "precious."

Sheesh.

-B-
Pristine...precious...whatever. Age hath resulted in this affliction of mine :flipoff2: But I got the first couple of letters right!

But I know that picture is out there unless you've paid Dan to bury it... :D I thought it looked pretty cute, in a :princess: sort of way.
 
griotsgarage.com sells a spray rubbery coating. you spray on the front of the hood for example, and peel it off in one sheet when you're done. maybe that is what you are looking for

Sounds like that might be worth looking into, but I just scowered that site and couldn't find it. Gotta link?
 
... I thought it looked pretty cute, in a :princess: sort of way.

And for Christmas, I'm wishing you a particularly bad winter with lots of snow and ice and salted roads. May your cruiser become one with ferrous oxide.

:flipoff2:

-B-
 
Beat me to it First Toy....

I have tried the Griot's spray on bra with good results. Just wash the car (helps to have a good coat of wax on it), dry and mask off the area. The hardest part is getting an even layer on. I used it on the rear quarter panels on my 1980 BMW 633CSi to keep the rock chips away. Once it started to show signs of use, I just peeled it off like a static sticker (like the ones the oil change places stick to the inside of the windshield).

The nose of my LC was pretty well chipped up by the time I found her, so I just put a wind deflector on.

I plan to use the Griot's stuff on my new to me BMW instead of a bra for road trips.

Riley
 
Yes, the link works and that Griot's stuff looks worthwhile. The paint stuff you posted looks like a waste of time.
-B-
 
The link is working now. This stuff looks more effective but its also more expensive then the temp paint. $20 for about 12 square feet may not cover both sides of the truck.

I'm gonna at least test the temp paint. If it doesn't work I am convinced that Griot's stuff would be a good option.

Thanks...

:beer:
 
Back
Top Bottom