Tdc timing mark issue 1hdt

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2020
Threads
4
Messages
12
Location
Vancouver bc
Just trying to base line a new to me vehicle 92 80 series 1hdt
Did a timing belt / waterpump with the direction of the service manual .
The virticle bdc markings line up perfect on the cam to injection pump but rotating it to check the cam to lower crank the timing Mark's apear to be off .

It must have been like this before because as far as I can tell that adjustment is in the timing gears.
Truck ran and started good with no black smoke or excessive fuel use .

Haven't started it up yet should i just leave it ?

20200923_201837.jpg


20200923_201825.jpg
 
Last edited:
Update for anybody in my position, the bottom crank and top cam gear marking dont line up on every rotation . I rotated the crank 2 or 3 more times it lined up perfectly.
Maybe I am blind but couldn't find the info in the repair manual .
 
Any update on this? Situation is identical...I left it as is since it was working for the past 100K, but I would like to understand the implications..
 
Back
Top Bottom