tcase-tranny question

[Mainer7]

Hello,
I have a few questions, here goes:

1. Will a 198x 2F 4 speed Tcase bolt up with a 1986 h55f? (38 mm)

2. Will a 198x 2f 4 speed bolt onto (and fit) a 1986 13BT bellhousing?

3. Does anyone know where to get the front part of a 38mm split TC? (the manual shift type)

I've got a 86 split case with the vaccum and may need to change it over to manual....

Thanks for reading

 

[cruiser_guy]

The 2F tranny WILL bolt to the 13B-T bellhousing BUT the input shaft does NOT fit the 13B-T engine (lengths are different as well as spline count and diameter for the clutch disk. The 3B and 13B-T trannys are interchangeable or you can get a 3B tranny input shaft and change your tranny to suit (I did that with the FJ55 of my daughters).
I think that the transfer case might work as long as you keep the section of transfer that is bolted to the H55F transmission.