TBI - no spray

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

update

Just an update - used a Noid light and have pulse at both injectors (basic light bulb didn't work as a substitute for the noid light and sent me down the wrong path). The injectors are getting fuel at 13 psi (gauge at TB inlet and plenty of fuel surrounding injectors in their pods).

So I'll send the injectors in for service and see if they can be cleaned and flow tested. Thanks again fellas. I'll be back at you in a few days. :)
 
theo said:
Just an update - used a Noid light and have pulse at both injectors (basic light bulb didn't work as a substitute for the noid light and sent me down the wrong path). The injectors are getting fuel at 13 psi (gauge at TB inlet and plenty of fuel surrounding injectors in their pods).

So I'll send the injectors in for service and see if they can be cleaned and flow tested. Thanks again fellas. I'll be back at you in a few days. :)


I don't think 13 PSI is enough..........pretty sure it needs to be up close to 20psi........
 
Texican said:
I don't think 13 PSI is enough..........pretty sure it needs to be up close to 20psi........
From what I can find out, factory pressure on GM 2 bbl TBI with Rochester injectors in the late 80's to early 90's was 9-13 psi. The regulators were adjusted at the factory and tackwelded. Common mod is to bust that tackweld and increase spring tension to raise pressure. Mine was set to ~11 psi before I made it adjustable.

Most of my info comes from a few websites like these:
http://chevythunder.com/gm_throttle_body_injection_pg_1.htm
http://www.goingfaster.com/spo/praisetbi.html
http://www.aces.edu/~gparmer/efi/tbi_adjust.htm
 
It's a Hoorah!

Fire in the hole
Hoorah sm.webp
 
Plugged injectors. (Sent them to WitchHunter Performance for cleaning. Excellent service, 1 day turnaround.) Fired right up with clean injectors, so either they were clogged or I had them installed wrong.

In the process of finding this problem I had to buy a noid light. And aw shucks I guess I did really need that Fluke I've been wanting and finally sprung for. (Damn, new tools, what a bummer!)

Thanks for the help. I'll be back soon with other problems.
 
Back
Top Bottom