TAC Garage Sale - 2008
- Thread starter trainrech
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
He called me the other and told me about it. Wish I were closer to KC so I could run up and visit with him when he picks it up..... He'll be like a kid in a candy store looking over your Cruiser stash 
He called me the other and told me about it. Wish I were closer to KC so I could run up and visit with him when he picks it up..... He'll be like a kid in a candy store looking over your Cruiser stash
Me............never
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
Good grief Clutchee what do you do.... search for any thread with your name it?Me............never
. If you decide to so South instead of East I've got a couple cold beers for ya brother.
I have 4 Goodyear 31 x 10.50 RTS tires mounted on AR OutlawII wheels with centercaps. They have about 4,000 miles on them and look new. I have a little over $800 in them and will take $450. Can make arrangements to meet any TAC'er half way or assist in a MudShip.
Thanks,
Ed
Thanks,
Ed
pic ed?
Well, here is an old one when the tires/wheels were on the cruiser.....I can take more if you want
Ed
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
FJ40 tear-down
$75 FJ60 H42 4 speed w/spacer
$200 FJ60 "Split-Case" Transfer Case. I had to "steal" a part from it a few weeks ago but have replacements and a gasket on the way.
$70 Complete FJ60 stock third members (2). Oilly and I don't feel like cleaning 'em and they're in the way.
$20 Tracker/Side Kick fold-n-tumble rear seat w/head rests addes (I spoke with a couple people at DSR about it. Eric Butler for sure)
SOLD OEM 4 core radiator (no leaks)
SOLD "Bobby Moran" H.D. skid plate, setup for SM420/3spd
SOLD '78 2F w/Weber 38mm, header, non-US dizzy, Pertronics (IIRC), minus the alternator.
SOLD Family cage w/Tuffy overhead box, CB, stereo and speakers
$300 NWMP rear fuel tank, shortened to fit with flipped rear springs and skid plate (65swb45 has first shot at it).
$2000 H42/4.7 Toybox/Splitcase. Build just over a year ago and has 3 runs on it. (pending but not a done deal yet)
Disassembly starts this weekend..... Need cash to order the Atlas II
email me for pics and I'll try to get some posted this weekend.
Located in Wichita, KS
I'll be headed to Clayton, OK the weekend of Nov. 13-16 or can help work out MudShip.
Thanks,
Mike
$75 FJ60 H42 4 speed w/spacer
$200 FJ60 "Split-Case" Transfer Case. I had to "steal" a part from it a few weeks ago but have replacements and a gasket on the way.
$70 Complete FJ60 stock third members (2). Oilly and I don't feel like cleaning 'em and they're in the way.
$20 Tracker/Side Kick fold-n-tumble rear seat w/head rests addes (I spoke with a couple people at DSR about it. Eric Butler for sure)
SOLD OEM 4 core radiator (no leaks)
SOLD "Bobby Moran" H.D. skid plate, setup for SM420/3spd
SOLD '78 2F w/Weber 38mm, header, non-US dizzy, Pertronics (IIRC), minus the alternator.
SOLD Family cage w/Tuffy overhead box, CB, stereo and speakers
$300 NWMP rear fuel tank, shortened to fit with flipped rear springs and skid plate (65swb45 has first shot at it).
$2000 H42/4.7 Toybox/Splitcase. Build just over a year ago and has 3 runs on it. (pending but not a done deal yet)
Disassembly starts this weekend..... Need cash to order the Atlas II
email me for pics and I'll try to get some posted this weekend.
Located in Wichita, KS
I'll be headed to Clayton, OK the weekend of Nov. 13-16 or can help work out MudShip.
Thanks,
Mike
Last edited:
Well I could use the gas tank , but I need to sell the one I have now Its a Confer 23 gal. With a toyota sending unit. It is the same design as the one Mike is selling but has not been modified for a spring reversal . Mike how many gal. does your tank hold now ? I will ask $300 for mine also Thanks Kirk
Last edited:
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
I was 22 gallon... not sure what it is now. I do have a "maybe" on it right now and I won't know for sure Monday.
Mike
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
Updated the list above.... All items OBO so don't be bashful.
Pix are here; https://forum.ih8mud.com/sale-parts/249788-40-parts-fs.html
Pix are here; https://forum.ih8mud.com/sale-parts/249788-40-parts-fs.html
Last edited:
Well, they are correct backspacing for an FJ40, dunno about the Runner. That is IFS? Seems like they have deeper BS than a SA, so they would fit, just give it a wider stance if I am correct.
Ed
Dillon RL550B reloader and reloading goodies
Dillon RL550B reloader
1 - RL550B reloader.
1 - Early Primer warning indicator
1 - CM500 Separator with tub
1 - CV500 Vibratory cleaner
5 – small pickup tubes (extra ends too)
5 – big pickup tubes (extra ends too)
1 – Toolkit and extra parts
Dies, in the following Calibers:
.40 S+W/10mm (RCBS)
9mm (RCBS)
.45ACP (RCBS)
.38/.357 (RCBS)
.44 MAG (RCBS)
6.5X55 Swedish Mauser (Lyman)
.223 (RCBS)
Caliber Conversion kits and Toolheads for each of these die sets. Most have the crimper die as well.
2 - Dillon powder systems
2 – Powder bars (small/large)
5 – Toolhead stands
50 +/- ammo boxes, various sizes
This machine was lightly used, in terms of what it’s capabilities are. I no longer reload .223, since I sold my heavy barrel varmint rifle, and therefore have no need for such a fast loader.
Included in this deal I have all kinds of other reloading paraphernalia, such as books and tools and woodblocks. I also have fresh powder, some open, some unopened. Most are 1 pound containers. The H335 is a gallon jug full.
Here is a list of the powder:
Hodgdon H1000
Hodgdon H4895
Hodgdon H335
Hodgdon H414
Hodgdon Lil-Gun
Winchester 296
Alliant 2400
Alliant Bluedot
IMR 4227
IMR 4350
IMR 4895
Tally all that up and you will be in the $1200.00 to $1600 range. I will sell it all for $800, local pick-up only.
I also have about 1200 - 1500 once fired .223 brass cleaned and ready to work. Not sure on price yet.
I will post up here first then to the general public in the for sale forum. PM or email me at bharcombe at kc.rr dot com
Thanks
Brian
Dillon RL550B reloader
1 - RL550B reloader.
1 - Early Primer warning indicator
1 - CM500 Separator with tub
1 - CV500 Vibratory cleaner
5 – small pickup tubes (extra ends too)
5 – big pickup tubes (extra ends too)
1 – Toolkit and extra parts
Dies, in the following Calibers:
.40 S+W/10mm (RCBS)
9mm (RCBS)
.45ACP (RCBS)
.38/.357 (RCBS)
.44 MAG (RCBS)
6.5X55 Swedish Mauser (Lyman)
.223 (RCBS)
Caliber Conversion kits and Toolheads for each of these die sets. Most have the crimper die as well.
2 - Dillon powder systems
2 – Powder bars (small/large)
5 – Toolhead stands
50 +/- ammo boxes, various sizes
This machine was lightly used, in terms of what it’s capabilities are. I no longer reload .223, since I sold my heavy barrel varmint rifle, and therefore have no need for such a fast loader.
Included in this deal I have all kinds of other reloading paraphernalia, such as books and tools and woodblocks. I also have fresh powder, some open, some unopened. Most are 1 pound containers. The H335 is a gallon jug full.
Here is a list of the powder:
Hodgdon H1000
Hodgdon H4895
Hodgdon H335
Hodgdon H414
Hodgdon Lil-Gun
Winchester 296
Alliant 2400
Alliant Bluedot
IMR 4227
IMR 4350
IMR 4895
Tally all that up and you will be in the $1200.00 to $1600 range. I will sell it all for $800, local pick-up only.
I also have about 1200 - 1500 once fired .223 brass cleaned and ready to work. Not sure on price yet.
I will post up here first then to the general public in the for sale forum. PM or email me at bharcombe at kc.rr dot com
Thanks
Brian
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
Two sturdy metal tables with 2 slide-out drawers on each one. $5 each (still working on pics)
One big ol' artifical Christmas tree.... still in good shape, not pre-lit $20
One or two 4 drawer metal file cabinets. Not real purdy but they work $5 each
4 or 5 person tent with rainfly.... don't recall the brand but we haven't used it since we got the camper $20
One eliptical exercise machine.... rarely used. $200 (which is what I gave for it used and I know the previous owner seldom used it.
One big ol' artifical Christmas tree.... still in good shape, not pre-lit $20
One or two 4 drawer metal file cabinets. Not real purdy but they work $5 each
4 or 5 person tent with rainfly.... don't recall the brand but we haven't used it since we got the camper $20
One eliptical exercise machine.... rarely used. $200 (which is what I gave for it used and I know the previous owner seldom used it.
Last edited:
- Joined
- Sep 16, 2004
- Threads
- 194
- Messages
- 2,934
- Location
- Emporia, KS
- Website
- www.tornadoalleycruisers.org
- Thread starter
- #59
Mike - pics of the tables?
- Joined
- Jul 9, 2004
- Threads
- 386
- Messages
- 3,997
- Location
- Montgomery Co. TEXAS
- Website
- missionsonwheels.org
Our computers at home aren't connecting to the internet for some reason, but my work laptop is 
, unfortunantly I can't upload pics from it. Gonna have to have Deb figure it out when she gets home...... I'll get them uploaded as soon as possible.
We'll be heading to KC the weekend after Christmas (27 & 28). I can bring the tables (and everything else) up then.... Someone NEEDS this eliptical. It's nice!
Randy - are you gonna be around that weekend? If so I can bring the seats up too.
Once we start going through all the crap we've accumulated the last 8 years I'll start a "Moving Sale" thread. I'll no doubt have a bunch of Cruiser parts listed too. I don't wanna pack all this stuff just to unpack it a few days later.
If anyone is interested in buying a nice home in Goddard, KS with great schools, quiet cul-de-sac, fishing pond.......
, unfortunantly I can't upload pics from it. Gonna have to have Deb figure it out when she gets home...... I'll get them uploaded as soon as possible.We'll be heading to KC the weekend after Christmas (27 & 28). I can bring the tables (and everything else
) up then.... Someone NEEDS this eliptical. It's nice!Randy - are you gonna be around that weekend? If so I can bring the seats up too.
Once we start going through all the crap we've accumulated the last 8 years I'll start a "Moving Sale" thread. I'll no doubt have a bunch of Cruiser parts listed too. I don't wanna pack all this stuff just to unpack it a few days later.
If anyone is interested in buying a nice home in Goddard, KS with great schools, quiet cul-de-sac, fishing pond.......