T Max Compatibility with ARB Bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 7, 2003
Threads
85
Messages
1,656
Location
Indianapolis
I just picked up one of these for less than half the price shown here: https://www.carolinaclassictrucks.com/T-Max-12203-p-winches.html. I ran across something in another thread that installation of these on a ARB is difficult. Does anyone have any experience installing this type of winch on an FZJ80 with an ARB? Thanks.
 
Not a big deal but, I have ARB and T-MAxx 10k. The only thing I had to do was space the winch out a little because the winch motor hits. I used the spacers that came with my ARB bumper, not sure what they are for but they worker for me. I think it needs to spaced back about a quarter inch from it bolts to ARB. If you need pics I get you some.

:cheers:
 
Pictures would definately be awesome. Has anyone had to cut away part of the grill? I had heard that was the case.
 
Not a big deal but, I have ARB and T-MAxx 10k. The only thing I had to do was space the winch out a little because the winch motor hits. I used the spacers that came with my ARB bumper, not sure what they are for but they worker for me. I think it needs to spaced back about a quarter inch from it bolts to ARB. If you need pics I get you some.

:cheers:

The spacers are used when mounting the stock tow hooks/loops.
 
I don't remember whether he has an ARB or not, but I'll ask JaysDead40 how it went with his T-Max.

I installed my T-Max 10,000 into a non winch ARB, that was a tight fit but doable.
Winch.webp
 
like said above, just use spacers (stacked washers or a piece of steel with two holes drilled) to space it off the inside of the ARB. As the ARB starts to bend back, the t-max motor edges will touch before the feet sit flush against the face of the ARB.
 
Back
Top Bottom