T-fitting question (pics)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 27, 2003
Threads
35
Messages
237
Noticed a coolant smell a few weeks ago, couldn't source the issue. Checked the bottle, fluid level appeared normal. Yesterday, i took a short trip to the Autozone (less than 2 miles). Noticed the smell again, and this time, i could see wetness near the passenger side firewall, dripping down to the ground. I sourced the leak to a brass T fitting. I pulled it, but couldn't see any obvious scoring or cracks from the 'T' section. I did notice that the lower tube was bent in an oval, almost as if crushed. Is this normal, or is i supposed to be round? Earlier this year, i had most of my water hoses changed out, so the hose is not original, and I don't know what the fitting is supposed to look like. iI made it more round, but don't know if should've left it alone. Please advise!

Sorry for the pics...i didn't think to take any until after i fumbled about for a while. 1/2 banana at BEST.

T fitting removed.


T fitting.


T fitting, the questionable end after my reshaping.
 
Thanks for the response. I thought it was weird that there was no issues for coming on 6 months, 110+ temps during the summer; and now mid 30s weather. The cold may have done it? The truck is always garaged at night.
 
Back
Top Bottom