Suggestions for undercoating or rustproofing? Anyone?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 27, 2007
Threads
15
Messages
60
What do you guys use (for those that do it) for undercoating/rustproofing?
 
in other words...nothing works that you know of?
 
in other words...nothing works that you know of?

there are lots of options. the key is to be diligent and if you are, and you are starting with a relatively rust free platform you will be OK.

options i have seen work:
spraying the underside with gear oil or bar and chain oil. obviously you have to be careful of hot area et all but this does work. i would do it 1x in the fall and again in the spring. do it over a tarp to be good about the environ, let it drip "dry" then dispose of properly. then, if you have a nice long dusty road, go drive down that so you get a nice layer of protection.

or, you can get under there and spray again, in the fall and spring with something like this from eastwood:
http://www.eastwoodco.com/jump.jsp?itemID=1117&itemType=PRODUCT

p1458.jpg
 
Ohioxidiation
 
My truck came with the automatic under body oiler.
 
x2 on the oil on the frame bit.

I would just use a rag and lie under the thing, get covered in oil, but at least the rig would be coated and protected. I usually did it about twice a year when I lived in Ohio....

Now in NM, I've only done it once since I arrived last year. Once a year here is probably overkill.
 
My truck came with the automatic under body oiler.
I miss my automatic oiler! Fixed all the leaks last summer. I can park in the driveway now but I've been watching all of those nice anodized bolts slowly start to oxidize. Luckily the truck has super heavy duty undercoating from the dealer so when I got it the rust wasn't too bad. Ive used cheapo Autozone undercoating or flashing tar works real well too.
 
Back
Top Bottom