Sub tank sending unit wiring?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2006
Threads
157
Messages
1,009
Location
Oregon
Three wires coming off the sub tank sending unit should be as loquito states below. Is this how you all are wiring it?
Black = ground
Red = fuel gauge
Green = empty to George's ECU

Originally Posted by loquito
On my sender I have three wires

White/black = ground

yellow/red = fuel guage ie fuel level full, 3/4, 1/2, 1/4 etc

white/green = fuel empty


Romer has a different color schematic but I am wondering if that is his own?
attachment.php


Thanks all!
THis is my last step:cheers:
 
Romer wrote back and said that his color scheme is for his harness.

So I am going with loquito's color scheme.
 
I fired it up tonight and holy crap everything works and nothing leaks.

The pump comes on and transfers gas to main tank then shuts off when its empty just like it's suppose to do!

Many thanks to all that have helped me through this process.

Romer, cDan, George, Kevin, Slee, Skillet etc


I will add my experience to the FAQ for sub tanks.
 
Back
Top Bottom