stolen wheels

[msahr]

Man that sucks. You had locks and they stole them anyway? If you don't come up with something to at least move the truck soon I may have something you could borrow. I'll look it wouldn't be anything you could drive on, but at least to move it around the yard or into the garage. I should have at least one maybe 2 mounted tires on toyota 4x4 bolt pattern wheels.

 

[jkl72-40]

Was thinking to remove all tires and leave a note: sorry bitches I beat ya to the other two tires....

 

[murf]

That would be a great note to capture their faces on film when they read it....lol

Unfortunately 100 series wheels or lugs wont fit. but those early 80 wheels will bolt right up

 

[Living in the Past]

Believe the back spacing on a mini truck is the same as late model 40 series and 60/62 series and is not enough to run any 80 series wheels without a spacer. But bolt pattern is the same.

 

[Stepmurr]

I have four 2008 Tacoma rims I can't give away. They are yours (or anybody's) for free if you want them.

I also have all the original lug nuts that go with them and the factory spare steel rim. They are just taking up space and I have no use for them.

See this listing from a while back:

Arizona Classifieds / For Sale / Wanted

 

[medtro]

Believe the back spacing on a mini truck is the same as late model 40 series and 60/62 series and is not enough to run any 80 series wheels without a spacer. But bolt pattern is the same.

Rear axle should be fine with no spacers. I run 80 series 16" wheels on mini truck with no spacers but I have hi-steer conversion in the front. I am thinking OP could move his rear wheels to the front, and put 80 wheels on rear axle if needed.

 

[jkl72-40]

I have four 2008 Tacoma rims I can't give away. They are yours (or anybody's) for free if you want them.

I also have all the original lug nuts that go with them and the factory spare steel rim. They are just taking up space and I have no use for them.

See this listing from a while back:

Arizona Classifieds / For Sale / Wanted

Are those 16x7 or8??

 

[jkl72-40]

we removed my remaining 2 wheels so its on blocks now so gives me some time to find wheels a tires.......what a pain

 

[Stepmurr]

Are those 16x7 or8??

I don't know how rims are measured.

I just took a tape out to the one rim that has a tire half off and it measures 7" from inside bead to inside bead, and 8" from outside of the rim to outside of the rim.

 

[jkl72-40]

How much should these cost and thinking 20 buck a wheel am I off??

15 rims and tire toyota chevy

 

[Dimples]

I'd say you would be right on the money. You are going to dismount the old tires and dispose of them. That usually costs extra.

 

[jkl72-40]

Would these work on the rear?
BFG KM2s 33X10.50 R15 Mounted on ProComp 1069 Alloys

 

[msahr]

Would these work on the rear?
BFG KM2s 33X10.50 R15 Mounted on ProComp 1069 Alloys

Sounds like it might be a good deal, the wheels are about $100 each new.