Stock wheel hub to fender flare height.

[jcmiro]

Can somebody do me a favor of posting their measurements. I got a fata$$ of a beast and the weight of the armoring has sagged it to 34" and 37" rear. I searched the forums but found nothing.
thanks

My measurements currently are bottom of front wheel to fender 28", and rear 30" sitting on stock suspension with Bilsteins on 1.2" of front lift.

 

[RTaylor]

With stock suspension and 275/65/18 tires, I'm at 34" F and 36" R ground to fender. 19.5" and 20.5" hub to fender.

 

[gaijin]

With stock suspension and 285/70-17 tires:

Ground to fender: 35.5" Front 36.5" Rear

Center of hub to fender: 20.25" Front 21.25" Rear

 

[jcmiro]

Thanks for the help guys.

 

[CharlieS]

I realize this is digging up an old thread, but could some other folks share their hub to fender measurements on stock suspension vehicles that are not heavily loaded with bumpers and gear? I'm trying to see what lift I got from my kings/2721, but my baseline is not very helpful (106k on springs and heavier load than stock).

fwiw, after about 200 miles:
Hub to fender. Ground to fender.
21-1/2" 36-1/4" ft
22-3/4" 37-3/8" rr

appx equal side to side.

 

[LBridges]

Stock except for Trail Tailor step-sliders.

Center of hub to lower edge of fender above hub:
Left Front - 19-3/4"
Right Front - 19-3/4"
Left Rear - 22-1/4"
Right Rear - 22"