Steering Stablizer

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 23, 2006
Threads
268
Messages
1,871
Location
Charlotte North Carolina
I am not real mechanically versed but i am damn sure trying to be. I JUst got an old man emu steering stablizer to replace the one that apparently is gone on my 77 fj40. The pins dont go all the way thru is that normal or should i bore out the holes a bit to get it all the way thru. maybe a pic would help. any help is much appreciated. I am somewhat new to the mechanical world.
 
just a little love tapping with a hammer should do the trick huh
 
one more quick one. on the upper one on the frame. there is no gaps where it mounts right. it should fit flush on both sides of that little flange/hole
 
Both holes have a taper in them, opposite of the piece that you are trying to put in the hole....when you tighten the nut up, it will pull the piece on the shock into the taper on the mounting piece...


There might be a little gap, depending on the taper and how it seats into the bracket...but it will not be .750" to 1.0" or more..
 
dude, cant thank you enough. Preciate it.
 
Back
Top Bottom