Steering Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 26, 2004
Threads
42
Messages
405
Location
SE Mo
This is kind of a 2 part question, and am hopeing you Guys can help me out. Part one pertains to swapping in a Saginaw p/s box. I've found a few setups around here pretty reasonable, no problem there. I've noticed whenever someone asks about the boxes themselves the general reply is go with a 4 turn box. In looking at e-bay I'm seeing whats tearmed a " Nascar Steering Box " ( Saginaw Power Steering Box ) usually with a 16:1 or 17:1 ratio. Is this the slow ratio box that is being suggusted, and would this be heavy duty enough? Part two deals with a shackle reversal. Everything is new ( bushings, tre's, wheel bearings, etc ). Is it normal when cranking the wheel back and forth ( while sitting still ) to see the nose of the truck move slightly side to side as opposed to the wheels just turning? Just curious on that one. Thanks Guys, Al
 
I can't answer the box question, but yes the nose will move a little bit back and forth when you turn the wheels. The more caster you have theoretically the more movement you would see. Has to do with the tire contact patch being behind the the imaginary line through the trunion bearings intersecting the roadway. Picture's worth a thousand words.

http://encyclopedia.lockergnome.com/s/b/Castor_angle
 
Back
Top Bottom