Starting issue fixed - click but won’t start

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2017
Threads
9
Messages
71
Location
Venice
Heater tee busted

Overheated

Replaced tees

Noticed slow start

Normal driving temps after replaced, but not 100% rock steady

Next morning click click

Starter, hydrolocked blown headgaslet, melted something

Whats your guess?

Oil looks fine

Didn’t have a misfire

Seems to be fine yesterday

Battery good

Land Cruiser click no start after overheating


Toyota Land Cruiser Starter Fix - Clicking But Won’t Start - #landcruiser #toyotalandcruiser
 
Last edited:
Well one way to test if you are hydrolocked would be to pull all the spark plugs and turn it over. If fluid comes pouring out then yea…
 
When the heater T’s were replaced did you refill lost fluid (water or oem radiator fluid) and run the engine with the radiator cap off until air bubbles were seen? Much like bleeding the brakes. May resolve your issue fairly quickly.
 
When the heater T’s were replaced did you refill lost fluid (water or oem radiator fluid) and run the engine with the radiator cap off until air bubbles were seen? Much like bleeding the brakes. May resolve your issue fairly quickly.
No air bubbles were seen. Are we able to edit posts here?
 
The overheating problem is fixed, as far as I can tell. Now having an intermittent starting problem.
Land Cruiser click no start after overheating


Got it to start today, but sounds like the starter is in the way out? Unless I’m missing something here?

Check your battery cables. A lose ground will act like this.
 
Back
Top Bottom