Parting Out Stanwood, WA: 67 FJ40 Whole or Part (1 Viewer)

Joined
Feb 3, 2020
Messages
269
Location
Stanwood, WA
I have a 67 FJ40 that I planned on building but have decided not to. Ideally, I’d like to sell it whole but will part out if there’s no interest for it complete. Would take $1000 complete; sum of parts will likely be more if parted out. I have clear WA title in my name that matches frame. It has rust in floorboards and wheel wells. I’m sure there’s some in quarters but haven’t looked too hard with the diamond plate. Rear sill will need replaced. No rear tailgate or doors, or top.... There is a good frame but the mid crossmember was cut off and poor SBC mounts were welded in. Both axles are there, rear was converted to spring over but not the front. Front is 10 spline. Brake parts are still there but no hubs. Both fenders and aprons in ok shape; one is dented up but should come out with massaging. Have the hood and windshield frame, no bib. No motor/trans/t-case. Has some switches, some soft top hardware, gauge cluster, glove box door, glove box mouse nest, front heater, e-brake, brake master cyl and other random stuff.
If no interest whole, I’m open to shipping parts on buyers dime. I can take more pics. Title will go with frame.
FAC6FA1F-750C-4D7C-B0EE-65765F1F3D8F.jpeg
2EFB0002-7ED5-40B6-B5FA-EC37C52F3E36.jpeg
5DE2C3E4-2EAB-4C50-A47B-9183BBB9C870.jpeg
5C2720D5-BB9C-4EDE-B97C-32976B13FCB2.jpeg
8E4CD191-274B-48B5-9334-C65B243FB675.jpeg
 
Joined
May 2, 2018
Messages
166
Location
Texas
If you do ever come around to parting out, I would be interested in the "Oh-Sh*t" grab bar , the windshield fold down latches and brackets, as well as the center box of switches for the heater.

Good luck on your sale :cheers:
 
Joined
Feb 3, 2020
Messages
269
Location
Stanwood, WA
I will put you first for those. If there’s no interest in the next couple days for the whole thing, let the part out begin!
 
Joined
Apr 26, 2021
Messages
2
Location
Burein Wa
I have a 67 FJ40 that I planned on building but have decided not to. Ideally, I’d like to sell it whole but will part out if there’s no interest for it complete. Would take $1000 complete; sum of parts will likely be more if parted out. I have clear WA title in my name that matches frame. It has rust in floorboards and wheel wells. I’m sure there’s some in quarters but haven’t looked too hard with the diamond plate. Rear sill will need replaced. No rear tailgate or doors, or top.... There is a good frame but the mid crossmember was cut off and poor SBC mounts were welded in. Both axles are there, rear was converted to spring over but not the front. Front is 10 spline. Brake parts are still there but no hubs. Both fenders and aprons in ok shape; one is dented up but should come out with massaging. Have the hood and windshield frame, no bib. No motor/trans/t-case. Has some switches, some soft top hardware, gauge cluster, glove box door, glove box mouse nest, front heater, e-brake, brake master cyl and other random stuff.
If no interest whole, I’m open to shipping parts on buyers dime. I can take more pics. Title will go with frame. View attachment 2649134View attachment 2649135View attachment 2649136View attachment 2649137View attachment 2649141
Hi there I’m looking for two parts not sure if they are the same or not and can’t see them in your picture’s. Looking for the left and right front bumper extensions.. I have a 78 Fj40. If possible to get a picture of the front of the frame where the front bumper mount? What would you want for them? Thanks Joe
 
Joined
Feb 3, 2020
Messages
269
Location
Stanwood, WA
Sorry for not updating this sooner. I have a sale pending on the whole package. He asked me to give him to the end of this week to figure out moving it all.
 

Users who are viewing this thread

Top Bottom