Squeaky Vent Fan

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 7, 2007
Threads
11
Messages
31
Location
Pikesville MD
Ok I am going crazy due to a squeaky vent fan. It sounds like a bearing or something is starting to stick. I know it is related to the fan because when I turn the fan off the squeak goes away. It also starts and stops at random moments. It just drives me crazy to hear the annoying sound.

Any ideas on how to fix the issue? Is the fan motor easy to access? Has anyone dealt with servicing and/or replacing the fan motor?

I just need help before I pull my hair out.

Robb
'97 LX450
 
Do a search. The blower is about 3 screws. You'll likely find crap in there and an opportunity to oil a bushing.

DougM
 
You jinxed me!


I had that noise for a while. And then it went away. And after I read the title to this thread earlier, it started again when I was driving to the hardware store.
 
Here is one related thread:

https://forum.ih8mud.com/showthread.php?t=163041

(1) Take off the PS trim piece (remove the plastic "bolt" that attaches the trim piece to the firewall/footwell area and then pull up on the door jam area where there are 3 trim attachments dealyos - can't remember the techical name) - this gives you more room to work and better access to the screws/bolts

(2) Remove the 3 screws holding the fan motor cover in place

(3) Disconnect the electrical connector from fan motor

(4) Then IIRC there are three more screws or bolts to remove and the fan motor/blade unit will drop out. Clean and lube it up and put it all back together

:cheers:

P.S. If you "test" the fan before complete reassembly (i.e. plug the connector back in and turn on the fan) make sure you have a good grip on the motor. It has a pretty good "kick" to it when you turn it on, especially full speed :)
 
Back
Top Bottom